Technical Archive

Hamilton
Jazzmaster H36516135— lug 20mm

Hamilton Jazzmaster H36516135: 20mm strap. Alligator, box calf, shell cordovan and rubber, cut and stitched in Milano. Choose your leather.

Jazzmaster Cushion Auto Chrono

Artisanal Note

"This model requires a precise 20mm lug width to preserve the original sartorial balance."

Technical Specifications

Hamilton H36516135
Lug Width
20 mm

The essential strap measurement.

Browse 20mm straps →
Reference

H36516135

Movement

ETA caliber 7750 Hours, Minutes, Small Seconds | Date, Day | Chronograph

The Heritage

The Hamilton Jazzmaster H36516135 is a modern chronograph with a 44 mm stainless steel 316L case and 20 mm lug width. It features an ETA caliber 7750 automatic movement with column wheel and complete chronograph functions including hours, minutes, small seconds, date, and day. Water resistant to 100 meters, this watch combines clean design lines with structured dial layout and transparent caseback.

FAQ

What is the correct lug width for the Hamilton Jazzmaster H36516135?

The lug width of the Hamilton Jazzmaster H36516135 is 20 millimeters. This measurement represents the internal distance between the case lugs and determines compatibility with any aftermarket strap. To verify the measurement accurately, remove the original strap and insert a digital caliper between the two pin contact points: acceptable tolerance is ±0.5 millimeters to ensure smooth installation.

What strap material is recommended for the Jazzmaster H36516135?

The Hamilton Jazzmaster H36516135, with its 44 millimeters stainless steel case and ETA 7750 chronograph movement, pairs naturally with alligator or vegetable-tanned leather straps for formal contexts, or robust NATO straps for sports use. Alligator leather maintains pure elegance with characteristic grain; vegetable-tanned leather develops historical patina over time. Synthetic rubber represents the technical solution for high-stress environments.

How do you change the strap on a watch with 20mm lugs?

To change the strap on a watch with 20mm lugs, use a spring bar tool to extract the pivot pins from the case lugs. Position the tool in the lateral slot of the pin, applying downward pressure: the pin will retract allowing strap removal. Repeat on the other side. To install the new strap, align the holes with the pins and insert the tool in the opposite slot to compress the pin, then guide the pin into place. The operation requires care to avoid scratching the case.

Which aftermarket straps are compatible with the H36516135?

Any strap with 20 millimeters lug width is compatible with the Hamilton Jazzmaster H36516135. Custom-made straps in alligator, calf, crocodile, or synthetic materials guarantee structural compatibility. Always verify the lug width is specifically 20mm: some manufacturers claim generic compatibility, but variable construction tolerances can cause poor fit. Professional straps from Milano Straps are crafted with precise tolerances for guaranteed fit.

How long does a leather strap last on a watch with a chronograph movement?

A high-quality leather strap (alligator, vegetable-tanned calf with natural tannins) typically lasts 3-5 years of daily use on a chronograph watch. Strap stress increases during chronograph operation since the wrist tends to flex during sports use. Naturally tanned vegetable leather develops greater resistance to repeated flexing, extending durability beyond 5 years. Synthetic rubber maintains integrity beyond 10 years. Critical factors: environmental humidity, frequency of use, direct sun exposure, and maintenance care (regular cleaning, occasional conditioning with natural oils).