Glashütte Original
Senator 100-04-05-12-01— lug 20mm
Glashütte Original Senator 100-04-05-12-01: 20mm strap. Alligator, box calf, shell cordovan and rubber, cut and stitched in Milano. Choose your leather.
Artisanal Note
"This model requires a precise 20mm lug width to preserve the original sartorial balance."
Technical Specifications
Glashütte Original 100-04-05-12-01The essential strap measurement.
Browse 20mm straps →100-04-05-12-01
Glashütte Original caliber 100-04 Hours, Minutes, Seconds | Big Date | Moonphase
The Heritage
Compatible Straps
Selected for the 20mm lug width of the Senator
FAQ
What is the lug width of the Glashütte Original Senator 100-04-05-12-01?
The lug width of the Glashütte Original Senator 100-04-05-12-01 is precisely 20 mm. This specification is unique to this model and represents the distance between the two suspension holes where the strap pin is inserted. The measurement can be verified with a digital calliper by positioning the tips on the inner edges of the lugs.
Which strap is most suitable for the Glashütte Original Senator 100-04-05-12-01?
For the Senator 100-04-05-12-01, straps in alligator (dark brown, cognac), shell cordovan (burgundy, wine), vegetable-tanned calf (beige, pearl grey), or NATO in neutral tones are recommended. The choice depends on use case: alligator for daily elegance, shell cordovan for long-term investment, vegetable-tanned leather for those seeking natural patina, NATO for summer versatility. Avoid tonal straps that match the dial, as they compromise aesthetic legibility.
How do you change the strap on the Glashütte Original Senator 100-04-05-12-01?
Changing the strap on the 100-04-05-12-01 requires a dedicated spring bar tool and approximately two minutes of careful attention. Position the watch with the strap facing upwards, locate the pin that connects the lug to the strap (there are two pins, one on each side), gently remove the pin using the spring bar tool with steady linear pressure. Once the pin is removed, the strap will be freed. To install the new strap (20 mm lug width), insert the new strap into the lug, align the hole, and reintroduce the pin with the same linear pressure until you hear the locking click.
Is an aftermarket strap compatible with the Glashütte Original Senator 100-04-05-12-01?
Yes, any strap with a 20 mm lug width is compatible with the 100-04-05-12-01, provided that the strap keeper (the circular section of the strap that embraces the case) allows the buckle to move without scratching the crystal. It is advisable to verify that the leather thickness is between 1.2 and 1.5 mm to avoid excessive stress on the pins. Straps produced by quality artisans maintain these standard specifications.
How long does a leather strap last on the Glashütte Original Senator 100-04-05-12-01?
A quality alligator or calf strap on a daily-wear watch such as the Senator 100-04-05-12-01 has an average lifespan of 4-6 years before replacement is necessary. Shell cordovan, thanks to the unique fibrous structure of the horse's back, can last 8-10 years or longer. Vegetable-tanned leather tends to develop patina more rapidly, reaching its aesthetic prime around the third year. Actual durability depends on frequency of wear, climatic conditions, wrist perspiration, and maintenance practices such as periodic cleaning and conditioning with specialised creams.