Certina
DS Action C032.607.11.051.00— lug 20mm
Certina DS Action C032.607.11.051.00: 20mm strap. Alligator, box calf, shell cordovan and rubber, cut and stitched in Milano. Choose your leather.
Artisanal Note
"This model requires a precise 20mm lug width to preserve the original sartorial balance."
Technical Specifications
Certina C032.607.11.051.00The essential strap measurement.
Browse 20mm straps →C032.607.11.051.00
ETA caliber C07.611 Hours, Minutes, Seconds | Date
The Heritage
Compatible Straps
Selected for the 20mm lug width of the DS Action
FAQ
What is the lug width of the Certina DS Action C032.607.11.051.00?
The lug width of the C032.607.11.051.00 is 20mm. This dimension reflects the 43mm case diameter according to Certina's construction proportions. The lugs are structurally integrated into the case through a shoulder system that allows controlled opening and closing of the strap. It is essential to verify tolerance when selecting an aftermarket strap, as even minimal deviation could generate abnormal stress on the attachment point.
Which strap is recommended for the Certina DS Action C032.607.11.051.00?
For the C032.607.11.051.00, Milano Straps recommends three options based on intended use and desired aesthetics. An alligator strap with fine grain emphasizes sporty-elegant character whilst maintaining coherence with the ceramic bezel. Vegetable-tanned calf develops an ageing patina over time that imparts vintage character. For pure functionality, a robust canvas NATO or silicone rubber strap guarantees constant grip even when wet, ideal for intensive diving use.
How do you change the strap on a Certina DS Action watch?
The C032.607.11.051.00 uses a non-standard integrated attachment system. To remove the original strap, identify the fixing pins on either side of the lugs: these must be extracted using a spring bar tool with controlled inward pressure. Once removed, the strap can be taken off. To install the new 20mm strap, insert the pins through the new strap lugs, then press them into the case shoulders until fully engaged. If uncertain, consult an expert to avoid damaging the attachment points.
What aftermarket strap is compatible with the Certina DS Action C032.607.11.051.00?
All straps with 20mm lug width are compatible with the C032.607.11.051.00, provided they meet the required dimensional tolerance (±0.2mm). Milano Straps offers a selection of 20mm straps in alligator leather, vegetable-tanned calf, shell cordovan, and fabric NATO and silicone rubber straps. Before purchasing, verify that the strap is specifically designed for 20mm lug width, as incorrectly sized attachments could damage the movement or compromise strap change functionality.
How long does a leather strap last on a Certina DS Action?
The lifespan of a leather strap depends on the tanning method, daily wear, and environmental conditions. A vegetable-tanned calf, if worn daily and subjected to regular moisture (such as in diving use), has an estimated lifespan of 4 to 7 years before replacement is needed. Alligator, being more wear-resistant, can extend to 10 years. Silicone rubber is more durable in humid and aquatic environments, offering 8–12 years of reliability. A canvas NATO theoretically offers unlimited lifespan with proper washing and maintenance. To extend strap life, avoid prolonged direct sun exposure and rinse the strap with fresh water after each immersion.