Oris · Big Crown
Strap for Oris Big Crown 01 754 7551 4061
Takes 18 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Big Crown 01 754 7551 4061
Selected for the 18 mm lug width
Vintage Brown Calfskin Strap — Natural Patina€98
Hammered Pink Strap with Ecru Stitching€98
Hammered Yellow Strap with Ecru Stitching€98
Grey Hammered Leather Strap with Ecru Stitching€98
Swift Red Leather Strap€120
Hammered calfskin strap in cuoio€98
The Big Crown 01 754 7551 4061, seen from the bench
Frequently asked questions
What is the exact lug width of the Oris Big Crown 01 754 7551 4061?
The lug width (ansa) of the Oris Big Crown 01 754 7551 4061 is 18 millimetres. This intermediate width is typical of the 36mm models in the Big Crown collection and is compatible with the entire range of artisanal straps available on Milano Straps in the 18mm category. The measurement is taken from the base of the upper lug tube to the base of the lower lug tube of the spring bar attachment, in a straight line.
What is the best strap for the Oris Big Crown 01 754 7551 4061?
The ideal strap depends on usage and dial colour. To highlight the vintage aviation character, we recommend a strap in vegetable-tanned leather, preferably in military green, slate blue, or havana brown tones. If you seek durability without maintenance, a ballistic NATO strap in a well-chosen colour maintains the visual proportion of the case. Vegetable-tanned calf leather with natural patina offers the best compromise between aesthetics and daily wearability. For those seeking exclusivity, shell cordovan presents a depth of colour that evolves over time, creating a unique patina.
How do you change the strap on the Oris Big Crown 01 754 7551 4061?
The Big Crown 01 754 7551 4061 features straight-bar lugs easily accessible from the case. To replace the strap: 1) Obtain a spring bar tool or a small flathead screwdriver; 2) Position the watch securely; 3) Apply upward pressure to one of the two metal tubes of the lug to extract them from their seats; 4) Repeat the operation from the opposite side; 5) Insert the new tubes into the case holes until you hear the click of engagement. The operation takes approximately two minutes for someone with experience.
Is an aftermarket strap truly compatible with this Oris 01 754 7551 4061?
Yes, completely. Because the lug width is an industrial standard (18mm), any artisanal strap with an 18mm width is compatible with the Big Crown 01 754 7551 4061. Milano Straps offers a selection of bespoke straps in various leathers (European calf, alligator, shell cordovan), ballistic NATO fabrics, technical rubber, and even variants with integrated deployante clasps. Artisanal quality is often superior to OEM straps because it permits personalised choice of material, tint, finish, and thickness.
How long does a leather strap last on the Oris Big Crown 01 754 7551 4061?
The lifespan of a leather strap depends on intensity of use, climate, and maintenance. A good-quality calf leather strap, worn daily, typically lasts 3–5 years before replacement becomes necessary due to lug deterioration or fibre breakdown. Vegetable-tanned leather tends to last longer than standard chrome-tanned leather because it ages in a controlled manner. Shell cordovan, being a denser fibre, can reach 6–8 years of active service. Rotating the strap (keeping at least two available), keeping it dry, and protecting the leather from excessive moisture significantly extends the useful life of the accessory.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
