Certina · DS Podium

Strap for DS Podium Square Chronograph

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter39 mm
ReferenceC0015141605701
FamilyDS Podium
MovementETA caliber 7750 hours, minutes, small seconds | date, day | Chronograph
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the DS Podium C0015141605701

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The DS Podium C0015141605701, seen from the bench

The Certina DS Podium C0015141605701 is a 39mm stainless steel chronograph representing the evolution of Swiss watchmaking heritage since 1888. Equipped with the ETA 7750 manual-wind movement, it features hours, minutes, small seconds, date, day, and chronographic function with 30-minute and 12-hour counters. The 20mm lug width accommodates standard men's wrist sizes, ensuring proper proportions relative to the case diameter.

Frequently asked questions

What is the exact lug width of the Certina DS Podium C0015141605701?

The lug width of the Certina DS Podium C0015141605701 is 20mm. This measurement represents the distance between the two lugs (attachment points) of the case. To verify compatibility, measure from the centre of the top lug to the centre of the bottom lug; it must correspond to 20mm. Only straps dimensioned for this width will fit correctly without force or excessive play.

Which strap is most suitable for the Certina DS Podium C0015141605701?

For this Swiss sports chronograph, we recommend three solutions. An alligator or vegetable-tanned leather in dark shades (cognac brown, burgundy) for elegant daily wear. A cotton NATO for versatility and frequent changing without stress to the case. Vulcanised rubber for intensive use and sport, where comfort and practicality outweigh aesthetic considerations. The choice depends on your lifestyle and frequency of use.

How do you change the strap on the Certina DS Podium C0015141605701?

Position the watch on a soft surface and use a spring bar tool. Insert the flat end of the tool into the hole beneath the lower lug, gently press downward to compress the internal spring, and pull the strap outward. Repeat for the upper lug. Insert the new strap by aligning the holes with the lugs, pressing until you hear the correct insertion click. Never force: if it resists, the alignment is incorrect.

Can I use an aftermarket strap on this watch?

Yes, provided the aftermarket strap is designed for 20mm lug width. The case geometry of the Certina DS Podium C0015141605701 does not impose special requirements, but respect the internal spring diameter (typically 1.8mm for this class). Avoid straps with excessive thickness that could stress the lugs; prefer materials of certified quality (vegetable-tanned leather, vulcanised rubber, cotton).

How long does a leather strap last on this watch?

Durability varies with use and maintenance. A quality leather strap (alligator, calf, shell cordovan) typically lasts 3–5 years if worn daily. Factors affecting longevity: exposure to sweat and humidity, cleaning frequency, tanning type, initial material quality. Vegetable-tanned leather improves with patina but requires occasional conditioning with natural oils. Rubber, conversely, has superior durability (5–7 years) but is less noble aesthetically.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only