Certina · DS-1

Strap for DS-1 Roman

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter39 mm
ReferenceC0064071108800
FamilyDS-1
MovementETA caliber 2824-2 hours, minutes, seconds | date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the DS-1 C0064071108800

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The DS-1 C0064071108800, seen from the bench

The Certina DS-1 reference C0064071108800 is powered by the automatic ETA 2824-2 caliber with hours, minutes, seconds and date functions. The Swiss Made movement provides a power reserve of approximately 38 hours. The DS-1 series is part of Certina's Double Security collection, characterized by high resistance to shocks and water.

Frequently asked questions

What is the lug width of the Certina DS-1 C0064071108800?

The lug width of the Certina DS-1 C0064071108800 is 20 millimetres. This measurement is essential when selecting any third-party strap. To verify this dimension, remove the original strap and measure the distance between the two lug pins using a digital calliper. Any 20mm strap will be compatible with this model without requiring modifications.

Which strap is most suitable for the Certina DS-1 C0064071108800?

The ideal strap depends on your intended use and personal preferences. For formal occasions, an alligator or vegetable-tanned calf leather strap emphasises the elegant character of the model. For daily wear, a cotton-nylon NATO offers practicality and versatility. If you anticipate frequent water exposure, a vulcanised rubber strap preserves the water resistance declared by the manufacturer. The stainless steel case of the DS-1 harmoniously accepts virtually any leather shade, from brown variants to formal black.

How do you change the strap on a Certina DS-1 watch?

Position the watch on a soft surface with the dial facing downwards. Locate the pins that pass through the lugs (one on each side). Using a dedicated tool or fine needle, carefully lever the pin upwards from below to remove it from the socket. Extract the original strap. Insert the new strap through the lug openings and slide the pins back into position, ensuring they are fully seated. Avoid excessive force: correct installation requires gentle engagement only.

Does the Certina DS-1 C0064071108800 accept aftermarket straps?

Yes, the Certina DS-1 C0064071108800 accepts quality aftermarket straps perfectly, provided they respect the 20-millimetre lug width specification. Premium leather straps, NATO textiles, technical rubber, or shell cordovan are all compatible. Source straps from suppliers who guarantee precision in lug dimensions and utilise durable materials. An inferior-quality strap presents no mechanical risk, but reduces aesthetic pleasure and longevity.

How long does a leather strap last on a Certina DS-1 watch?

A high-quality leather strap, when properly maintained, typically lasts between three and six years with regular daily wear. Materials such as alligator or shell cordovan age with elegance, developing a sought-after patina. Vegetable-tanned calf evolves with time, acquiring character. Longevity depends on: direct sunlight exposure, ambient humidity, frequency of wear, and maintenance care (occasional cleaning, proper drying). A vulcanised rubber strap lasts longer, typically eight to ten years, as it is impervious to moisture.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only