Certina · DS Action

Strap for DS Action Diver

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter43 mm
ReferenceC013.407.17.041.00
FamilyDS Action
MovementETA caliber 2824-2 hours, minutes, seconds | date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the DS Action C013.407.17.041.00

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The DS Action C013.407.17.041.00, seen from the bench

The Certina DS Action reference C013.407.17.041.00 is equipped with the automatic ETA caliber 2824-2 with indication of hours, minutes, seconds and date. The model belongs to the DS Action collection of the Swiss brand Certina. The watch uses the ETA 2824-2 caliber, an automatic movement with a power reserve of approximately 38 hours.

Frequently asked questions

What is the lug width of the Certina DS Action C013.407.17.041.00?

The lug width of the Certina DS Action C013.407.17.041.00 is 20mm. This measurement should be taken with the watch positioned face down, measuring the distance between the two horizontal pins that hold the original bracelet. It is essential to ensure the ruler is perfectly perpendicular to the pins for accurate measurement.

Which strap is most suitable for the Certina DS Action C013.407.17.041.00?

The Certina DS Action C013.407.17.041.00, with its sporty 43mm case and black dial, pairs ideally with alligator straps in medium brown or burgundy, NATO straps in dark blue or military green, or anthracite rubber. For formal wear, we recommend vegetable-tanned alligator with stainless steel deployante; for daily sport use, NATO maintains the original tactical character; for water exposure, rubber is the ultimate technical choice.

How do you change the strap on a Certina DS Action C013.407.17.041.00?

To change the strap, position the watch on a soft surface with the case face down. Use a dedicated spring bar tool to compress the lateral horizontal pins: insert the small fork of the tool under the pin, apply pressure toward the opposite side, and the pin will retract allowing removal of the old strap. Align the holes of the new strap with the pins and reinsert using the same procedure, ensuring the pin is fully inserted and clicked into position.

Are aftermarket straps compatible with the Certina DS Action C013.407.17.041.00?

Yes, any strap with 20mm lugs and standard pin attachments is compatible with the C013.407.17.041.00. However, it is advisable to prioritise artisanal straps of elevated build quality: vegetable-tanned leather with refined edge painting, robust textile pass-through, and adequately spaced lugs. Low-to-medium quality aftermarket options may compromise the aesthetic balance of a technical movement such as the ETA 2824-2.

How long does a leather strap last on the Certina DS Action C013.407.17.041.00?

The durability of a leather strap depends on usage intensity and exposure to environmental factors. An artisanal vegetable-tanned leather strap of quality construction, subjected to moderate daily use, maintains structural integrity and aesthetic appeal between 18 and 36 months. Exposure to perspiration, fresh water, or salt water accelerates ageing. The natural patina that develops is a feature, not a defect: it represents the visual evolution of the material. To extend durability, periodically rotate the strap and apply protective creams based on natural ingredients.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only