Mido
Belluna M024.307.22.116.00— lug 16mm
Mido Belluna M024.307.22.116.00: 16mm strap. Alligator, box calf, shell cordovan and rubber, cut and stitched in Milano. Choose your leather.
Artisanal Note
"This model requires a precise 16mm lug width to preserve the original sartorial balance."
Technical Specifications
Mido M024.307.22.116.00The essential strap measurement.
Browse 16mm straps →M024.307.22.116.00
ETA caliber C07.611 Hours, Minutes, Seconds | Date
The Heritage
Compatible Straps
Selected for the 16mm lug width of the Belluna
FAQ
What is the lug width of the Mido Belluna M024.307.22.116.00?
The lug width of the Mido Belluna M024.307.22.116.00 is 16mm. This measurement refers to the internal distance between the two lugs on the watch case. To verify this correctly, use a digital calliper to measure the area where the strap inserts. It is essential not to confuse lug width with case thickness (approximately 8mm) or overall case diameter (33.40mm). Any strap designed for 16mm lug width will fit this model perfectly.
Which strap is recommended for the Mido Belluna M024.307.22.116.00?
For the Mido Belluna M024.307.22.116.00, we recommend a Mississippi alligator in dark tones (midnight blue, dark brown) for maximum formal elegance. Alternatively, vegetable-tanned calf leather offers versatility and natural patina development over time. For daily practicality whilst maintaining understated aesthetics, a polyamide NATO in black or grey ensures durability and quick-change capability. Strap thickness must comply with 16mm standards to avoid excessive pressure on the lugs or undesirable play.
How do I change the strap on my Mido Belluna M024.307.22.116.00?
Change the strap on your Mido Belluna M024.307.22.116.00 using a spring bar removal tool. Position the watch horizontally, insert the tool's tip into the small slot beneath the upper lug, press gently to release the spring bar, then withdraw the old strap. Repeat for the lower lug. Insert the new strap by aligning the holes with the spring bars, then press until you feel the locking click. The procedure takes 2–3 minutes and requires no specialist technical skills.
Will an aftermarket strap with 16mm lug width fit my Mido Belluna?
Yes, any artisanal or commercial strap designed with 16mm lug width will be fully compatible with the Mido Belluna M024.307.22.116.00. Milano Straps offers a carefully curated selection of straps in alligator, calf, shell cordovan, NATO, and rubber—all tested on 16mm lugs. Compatibility is guaranteed by international standardisation: the crucial factor is ensuring your new strap is correctly designated for this lug width. Avoid undersized or oversized straps, as these compromise comfort and longevity.
How long does a leather strap last on a watch like the Belluna?
The lifespan of a leather strap depends on frequency of use, climate conditions, and tanning method. High-quality alligator or calf leather, worn daily, typically lasts 3–5 years before showing signs of wear (edge deterioration, loss of elasticity). Vegetable-tanned leather tends to age gracefully, developing characteristic patina, whilst industrial leather deteriorates more rapidly. Exposure to excessive moisture (perspiration, rain) accelerates degradation. NATO straps, being polyamide, typically endure 5–8 years. To extend lifespan, alternate straps and allow them to dry thoroughly after perspiration or wet weather exposure.