Oris · ProPilot X
Strap for Oris ProPilot X 01 400 7778 7157
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the ProPilot X 01 400 7778 7157
Selected for the 20 mm lug width
Vintage Brown Calfskin Strap — Natural Patina€98
Hammered Pink Strap with Ecru Stitching€98
Hammered Yellow Strap with Ecru Stitching€98
Grey Hammered Leather Strap with Ecru Stitching€98
Swift Red Leather Strap€120
Hammered calfskin strap in cuoio€98
The ProPilot X 01 400 7778 7157, seen from the bench
Frequently asked questions
What is the lug width of the Oris ProPilot X 01 400 7778 7157?
The lug width of the ProPilot X is 20mm. This standard measurement is compatible with a wide range of artisanal straps. To verify compatibility, measure the space between the spring bar holes with a digital calliper; the result should be exactly 20mm. All straps with a 20mm lug width will fit this model perfectly.
Which strap is most suitable for the Oris ProPilot X 01 400 7778 7157?
The Oris ProPilot X 01 400 7778 7157, given its instrumental aesthetic and titanium construction, pairs ideally with NATO straps in ballistic nylon (preferably military green or navy blue), or with alligator leather via vegetable tanning in dark tones (tobacco, chocolate brown). Structured rubber represents the alternative for those seeking maximum operational practicality. Avoid excessively ornate or decorative straps: the ProPilot X philosophy is material honesty, not aesthetic embellishment.
How do I change the strap on an Oris ProPilot X?
The Oris ProPilot X strap is changed using a spring bar tool: insert the small tip into the groove of the spring bar until the internal spring compresses, gently lift the pin from its seat, and remove the old strap. Insert the new strap through the lug following the same procedure in reverse. If you do not have a spring bar tool (we recommend acquiring one: they cost just a few euros), an authorised watch service centre can assist in approximately five minutes of bench work. The operation requires no specialist tools nor poses any risk to the case.
Can I use an aftermarket strap on my Oris ProPilot X 01 400 7778 7157?
Absolutely. The ProPilot X was engineered with a standard 20mm lug width precisely to permit this modularity. Any strap with a 20mm lug width—whether NATO, leather, rubber, or specialised alternatives—will fit compatibly onto the titanium lugs. Milano Straps proposes a curated selection of artisanal 20mm straps in premium materials (alligator, structured English calf, ballistic NATO) that further elevate the utility and aesthetic longevity of your timepiece.
How long does a leather strap last on an aviation watch like the ProPilot X?
A high-quality leather strap (alligator with vegetable tanning, structured English calf) on an instrumental watch like the ProPilot X typically lasts 3–5 years with daily intensive wear. Longevity depends on exposure to humidity, perspiration, UV rays, and maintenance frequency. A thin leather strap (1.6–1.8mm) exposed to humid environments (frequent flying, water sports) may degrade in 18–24 months. Structured rubber, by contrast, resists significant aesthetic degradation for 7–10 years. To extend the life of a leather strap on an aviator, apply a silicone protectant every six months and allow it to dry thoroughly after each water exposure.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
