Oris · ProPilot X
Strap for Oris ProPilot X 01 115 7759 7115
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the ProPilot X 01 115 7759 7115
Selected for the 22 mm lug width · workshop selection
Grey Hammered Leather Strap with Ecru Stitching€98
Natural Calfskin Rally Strap€110
Vintage Brown Calfskin Strap — Natural Patina€98
Natural Calfskin NATO Strap€80
Black Saffiano Rubber Strap€105
The ProPilot X 01 115 7759 7115, seen from the bench
Frequently asked questions
What is the lug width of the Oris ProPilot X 01 115 7759 7115?
The lug width is 22 mm. This dimension was calibrated by Oris to maintain harmonious proportions with the 43 mm case diameter of the ProPilot X. Measure the vertical space between the two case lugs (the horizontal pins): they must be exactly 22 millimetres apart. A 20 mm strap would be too tight; a 24 mm strap would require unwanted adapters.
What is the best strap for the Oris ProPilot X 01 115 7759 7115?
The choice depends on intended use and aesthetic preference. For maximum elegance, we recommend alligator in black or dark brown with a titanium deployante. For balance between warmth and sophistication, vegetable-tanned calf leather develops a natural patina that ages beautifully. For those preferring a sportier aesthetic, premium NATO fabric in military green or slate grey emphasises the watch's aviation heritage. Vulcanised FKM rubber represents the optimal solution for extreme conditions or outdoor activities.
How do I change the strap on the Oris ProPilot X 01 115 7759 7115?
The ProPilot X uses a standard spring bar attachment mechanism. Obtain a dedicated spring bar tool. Position the curved end of the extractor under the horizontal pin, apply gentle upward pressure to release the internal spring, then extract the pin itself. Repeat on both sides of the case. Insert the new strap by aligning its lugs with the case holes, reinsert the pins gently until you feel the spring click into place. Verify that the strap rests uniformly on both lugs.
Can I use an aftermarket strap on this model?
Yes, provided the lug width is precisely 22 mm. High-quality aftermarket straps—alligator leather, vegetable-tanned calf, premium NATO fabrics—are fully compatible and often offer superior aesthetic value compared to original solutions. Always verify that the strap has properly dimensioned spring bars to comfortably accommodate your wrist, and that the buckle or deployante are compatible with the strap width.
How long does a leather strap last on a tool watch like this?
A quality leather strap (alligator with vegetable tanning or shell cordovan) subjected to regular use typically lasts 3–5 years, provided adequate maintenance. Protect the leather from salt water, excessive humidity, and prolonged direct sunlight, which causes fading. Condition the leather periodically with neutral-specific creams to preserve suppleness. For the ProPilot X, a vulcanised FKM rubber strap represents a more durable alternative (5–7 years), ideal for humid climates or intensive use.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
