Oris · ProPilot
Strap for Oris ProPilot 01 752 7698 4063
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the ProPilot 01 752 7698 4063
Selected for the 22 mm lug width · workshop selection
Grey Hammered Leather Strap with Ecru Stitching€98
Natural Calfskin Rally Strap€110
Vintage Brown Calfskin Strap — Natural Patina€98
Natural Calfskin NATO Strap€80
Black Saffiano Rubber Strap€105
The ProPilot 01 752 7698 4063, seen from the bench
Frequently asked questions
What is the lug width of the Oris ProPilot 01 752 7698 4063?
The lug width of the ProPilot 01 752 7698 4063 is 22mm. This measurement corresponds to the perpendicular distance between the outer axes of the two spring bars. To measure accurately, use a digital calliper positioned between the removable pins: standard practice for verifying strap compatibility. The 22mm specification remains the NATO standard for tool watches and pilot's watches in this category.
What is the best strap for the Oris ProPilot 01 752 7698 4063?
The choice depends on intended use. A NATO Premium in Cordura or woven fabric, Olive Green or Sage tone, enhances the avionic identity and delivers tactical robustness without compromise. For formal-casual versatility, vegetable-tanned calf leather in Cacao or Tobacco Brown ensures natural ageing and visible patina development. Black or espresso alligator adds refinement while preserving instrumental character. For humid or saline environments, FKM vulcanised rubber guarantees chemical durability and zero maintenance. All pairings are valid: it depends on your usage philosophy.
How do I change the strap on the Oris ProPilot 01 752 7698 4063?
Use a spring bar removal tool (a small lever or dedicated tool). Position the tool in the internal hole near the base of the lug, apply gentle lateral pressure to release the metal pin from its seat. The pin will slide freely. Repeat on the other side. Slide the old strap out of the lugs. Insert the new strap, align the holes, reposition the pins and allow them to click into place. A task of minutes: no specialist skill required.
Can I use an aftermarket strap in 22mm lug width?
Yes. Any strap with 22mm lug width is compatible with the ProPilot 01 752 7698 4063. Always verify that the holes align with the spring bars (construction tolerances occasionally vary slightly) and that the strap construction is as robust as the case: a tool watch deserves a strap worthy of it. Artisanal leather straps in full-grain (vegetable-tanned leather, alligator, shell cordovan) offer superior quality and longevity compared to industrially produced straps.
How long does a leather strap last on a watch like the ProPilot?
A full-grain leather strap with vegetable tanning lasts on average 3–5 years of intensive daily use, up to 7–8 years if worn occasionally. Visible wear (patina, light creasing, minor tears) is part of the natural character of the material. High-quality alligator, denser and less porous, can exceed 10 years. Vulcanised rubber lasts 5–8 years before elasticity diminishes. NATO Premium in synthetic textile exceeds 15 years without significant degradation. Real longevity depends on frequency of use, climate and maintenance: occasional conditioning for leather, rapid drying after moisture exposure.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
