Oris · Divers 65
Strap for Oris Divers 65 01 733 7707 4354
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Divers 65 01 733 7707 4354
Selected for the 20 mm lug width
Vintage Brown Calfskin Strap — Natural Patina€98
Hammered Pink Strap with Ecru Stitching€98
Hammered Yellow Strap with Ecru Stitching€98
Grey Hammered Leather Strap with Ecru Stitching€98
Swift Red Leather Strap€120
Hammered calfskin strap in cuoio€98
The Divers 65 01 733 7707 4354, seen from the bench
Frequently asked questions
What is the exact lug width of the Oris Divers Sixty-Five 01 733 7707 4354?
The lug width of the Oris Divers Sixty-Five 01 733 7707 4354 is 20 millimetres. This measurement represents the distance between the outer edges of the two lateral lugs where the strap attaches to the case. To verify this precisely, use a digital calliper, positioning the measurement perpendicular to the lugs. Should your particular example measure 19.5 mm, our 20 mm straps will still fit perfectly due to the natural elasticity of modern spring bar slots.
Which strap do you recommend for the Divers 65 01 733 7707 4354?
The recommendation depends on intended use and aesthetic preference. For frequent diving, we suggest an FKM or HNBR rubber strap: fully waterproof, zero moisture absorption, and resistant to saline treatments and solar oils. For daily elegance, alligator leather with vegetable tanning or Italian calfskin imparts sophistication to the oxidised bronze case. For tactical versatility, a high-thickness nylon NATO (1.6 mm minimum) offers ease of changing and robustness without compromise.
How do I change the strap on an Oris Divers 65?
Changing the strap on an Oris Divers Sixty-Five follows the standard procedure for watches with fixed lugs. Procure a spring bar removal tool with thin, flat levers. Position the watch on a soft surface to prevent scratching. Insert the tool's lever into the small lateral hole beneath the lug, apply gentle upward pressure to compress the internal spring, then withdraw the pin from the hole. Repeat on the opposite side. Remove the old strap and insert the new one, aligning the pins within the lugs. Push until you hear an audible "click" indicating secure seating. If the pin is difficult to move, apply a small amount of light lubricating oil around the internal spring.
Are aftermarket straps compatible with the Oris Divers Sixty-Five 01 733 7707 4354?
Yes, 20 mm aftermarket straps are fully compatible with your Oris Divers Sixty-Five, provided they are specifically designated for this lug width. A 22 mm or 18 mm strap will not fit correctly. Milano Straps supplies only 20 mm straps tested and dimensioned for this model. We recommend selecting manufacturers that clearly specify production tolerances and utilise Italian or Swiss-made spring bars: this guarantees longevity and impeccable fit.
How long does a leather strap last on an Oris Divers watch?
Leather strap longevity depends on tanning method, thickness, and usage patterns. A quality alligator strap with vegetable tanning, used daily without frequent immersion, typically lasts 4–6 years before significant wear appears at the edges and spring bar slots. Italian calfskin, being softer, develops a visible patina after 6–12 months—this is not degradation but rather the natural "signature" of genuine leather. If your Oris is immersed frequently in saltwater or fresh water, limit leather strap exposure during those periods and switch to rubber. After water exposure, dry the leather strap promptly with a soft cloth and air-dry horizontally, never near direct heat sources.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
