Oris · Artix
Strap for Oris Artix 01 733 7713 4031
Takes 19 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Artix 01 733 7713 4031
Selected for the 19 mm lug width
Vintage Brown Calfskin Strap — Natural Patina€98
Hammered Pink Strap with Ecru Stitching€98
Hammered Yellow Strap with Ecru Stitching€98
Grey Hammered Leather Strap with Ecru Stitching€98
Swift Red Leather Strap€120
Hammered calfskin strap in cuoio€98
The Artix 01 733 7713 4031, seen from the bench
Frequently asked questions
What is the lug width of the Oris Artix 01 733 7713 4031?
The Oris Artix 01 733 7713 4031 features a lug width of 19mm. This measurement represents the distance between the two lugs (the protruding ears on the case) where the strap attaches. This is the most common standard for 39-40mm watches. To verify the measurement, position a calliper on the inner edges of both lugs: you should read exactly 19mm.
Which strap do you recommend for the Oris Artix 01 733 7713 4031?
For the Artix, we recommend a vegetable-tanned Tuscan leather strap in brown or dark tones. This material reflects the sobering, authentic essence of the timepiece whilst developing a distinctive patina over time. Alternatively, for dynamic or sporting contexts, a NATO-style fabric strap or vulcanised rubber attachment guarantees practicality without functional compromise. Your choice should align with your lifestyle: daily elegance versus tactical versatility.
How do I change the strap on the Oris Artix 01 733 7713 4031?
The strap is replaced by removing the spring bars that connect the lugs to the case. Obtain a spring bar extractor tool (available for a few euros) or use a small flathead screwdriver. Insert the tool into the small slot beneath the spring bar, press gently upward to apply leverage, and the bar will retract. Remove the old strap. Insert the new one by aligning the lug holes with the spring bars and press firmly until they click into place. This operation takes 2-3 minutes without specialist skills.
Is an aftermarket strap compatible with the Oris Artix 01 733 7713 4031?
Yes, any strap with a 19mm lug width is compatible. The critical factor is construction quality: verify that the lug holes are perfectly aligned and that the finishing standards (stitching, edges) match your timepiece. All 19mm straps on milanostraps.it are tested for guaranteed compatibility. Choose between natural materials (Tuscan leather, alligator) or technical synthetics (NATO, rubber) according to your daily requirements.
How long does a leather strap last on the Oris Artix 01 733 7713 4031?
A quality leather strap, vegetable-tanned, typically lasts 2-4 years of daily use. Lifespan depends on climate (humidity and heat accelerate ageing), frequency of wear, and maintenance. Protecting leather from prolonged sun exposure and excessive perspiration extends its life. Over time, leather develops a characteristic, personal patina—many watch enthusiasts regard this evolution as an integral part of the Artix's narrative. When leather eventually fatigues, replacement is straightforward and economical: a key advantage of the Artix's modular design.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
