The crown is the physical point of contact between the wearer and the movement: everything that happens inside — winding the mainspring, setting the time, adjusting the date, GMT — almost always passes through it. From the bench I see it every day, and the first thing I check on a pre-owned watch is the crown's condition: it's the most stressed component and the one that betrays wear or mistreatment first.
The classic position is at 3 o'clock, horizontal axis. The Lépine tradition is an exception, where the crown sits at 12 o'clock, a legacy of the pocket watch. Some manufacturers intentionally relocate it: Seiko's Alpinist has a second crown at 4 o'clock to control the internal compass bezel; certain left-handed watches have it on the left side, so pilots or surgeons don't have to switch hands during a quick adjustment. Ressence took the opposite extreme: no visible crown at all, everything delegated to a retractable lever in the caseback. ZRC instead patented a Crown Protection System that physically prevents you from wearing the watch with an unscrewed crown — a radical solution, but consistent with dive-watch philosophy.
For water resistance, the screw-down crown remains the safest standard: it screws against the case and creates mechanical compression on the rubber gasket that no simple push-fit can match. The double gasket — two seals in series — doubles the redundancy. I've seen many watches declared water-resistant come back to the workshop with a corroded movement because the crown was left unscrewed. The manufacturer's rating only applies with the crown fully closed.
Shape has a long history. The onion crown — bulbous, domed, rounded edge — comes from nineteenth-century pocket watches and returns cyclically because it works: it provides immediate grip even with wet fingers. Knurled finishing, obtained with CNC milling, serves the same purpose with more modern vocabulary. Crown guards — the little metal ears on the sides — appear on dive watches to reduce the risk of accidental unscrewing against a wetsuit or pool edge.
The hack seconds function deserves separate mention: pulling out the crown stops the balance wheel dead. It allows synchronization to the exact second with a reference watch. On certain calibers it's absent — you need to know this before you buy, not after. The pusher integrated into the crown is a more recent solution: a hidden button in the crown head activates secondary functions, usually quick GMT adjustment, without adding external pushers to the case.