Panerai · Luminor

Strap for Panerai Luminor PAM00564

The Panerai Luminor PAM00564 takes 24 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Not sure about the right strap, or can't find your watch?Message me on WhatsApp
Lug width24 mm
Case diameter44 mm
ReferencePAM00564
FamilyLuminor
MovementPanerai caliber P.5000 Hours, Minutes, Small seconds

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Luminor PAM00564

Selected for the 24 mm lug width · workshop selection

All 24 mm straps →

The Luminor PAM00564, seen from the bench

The Luminor PAM00564 features a 44mm titanium case with 24mm lugs. It houses the manual-winding Panerai P.5000 caliber with hour, minute, and small seconds functions. The movement offers an eight-day power reserve.

Frequently asked questions

What is the lug width of the Panerai Luminor PAM00564?

The Panerai Luminor PAM00564 has a lug width of 24 millimeters. This dimension is essential for choosing a compatible strap. You can verify it by measuring the internal distance between the two lug attachments using a caliper, or by removing the original strap and measuring the external diameter of the lug itself. The 24 millimeters are invariable on this model.

Which strap should I choose for the Panerai Luminor PAM00564?

For the PAM00564 we recommend alligator leather straps (black or cognac) to amplify elegance, vegetable-tanned calf leather for a patina that evolves over time, or black FKM rubber for a sporty aesthetic. The choice depends on use: alligator for formal occasions, calf leather for daily wear with aesthetic evolution, rubber for water activities. Avoid NATO straps despite compatibility, as the weight of the titanium case and the screw-down crown require a strap with substantial body.

How do I change the strap on the Panerai Luminor PAM00564?

Removing the lug from the PAM00564 requires a specific tool to release the lateral pins. Proceed as follows: position the watch in a stable position, insert the small precision screwdriver under the lug retaining tab, lift gently until the upper pin is released. Repeat on the other side. Insert the new strap by aligning the lug holes with the pins, press until the closure clicks. Operate with extreme care to avoid scratching the titanium case.

Is a 24mm aftermarket strap compatible with the Panerai Luminor PAM00564?

Yes, any strap with a 24 millimeter lug width is compatible with the PAM00564. However, the mass of the 44 mm titanium case and the P.5000 movement suggest the use of straps with substantial body: leather at least 1.2 mm thick, or FKM rubber with canvas backing. We advise against thin fabrics or standard NATO straps, as they may not offer adequate resistance to frequent strap changes.

How long does a leather strap last on the Panerai Luminor PAM00564?

A quality leather strap, such as alligator or vegetable-tanned calf, lasts 5-8 years with daily use and regular maintenance. Durability depends on the frequency of changes (each change stresses the holes), exposure to moisture, and cleaning. We recommend keeping the strap dry, avoiding prolonged immersion in fresh or salt water, and cleaning regularly with a soft cloth. FKM rubber has superior durability, 10-15 years, but requires protection from direct ultraviolet light.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only

The atelier's website: casatimilano.com