Oris · Divers 65

Strap for Divers Sixty-Five 40 Ctime Limited Edition

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter40 mm
Reference01 733 7707 4397-Set
FamilyDivers 65
MovementOris caliber Oris 733 Hours, Minutes, Seconds | Date
CaseBronze, Stainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

The Divers 65 01 733 7707 4397-Set, seen from the bench

The Divers Sixty-Five is the modern reinterpretation of an Oris diving model from the 1960s. It is equipped with the Oris 733 automatic caliber with hour, minute, second and date functions. The lugs measure 20mm in width.

Frequently asked questions

What is the lug width of the Oris Divers 65 01 733 7707 4397-Set?

The Oris Divers 65 01 733 7707 4397-Set features 20-millimetre lugs. This measurement, expressed as the inner distance between pins, is standard in professional dive watches and ensures compatibility with all straps certified for this dimension. To verify the measurement, place a rigid ruler perpendicular to the case lugs, measuring the internal distance.

Which strap is most suitable for the Oris Divers 65 01 733 7707 4397-Set?

Selection depends on intended use. For formal elegance: vegetable-tanned leather or alligator in dark brown. For marine operation: NATO in ballistic nylon or Fluoroelastomer rubber. The case bronze dialogues naturally with burnished or cinnamon leather; vegetable tanned calf with tannin tanning develops a patina that evolves over time. For regular diving, rubber is the superior technical choice: it maintains flexibility at low marine temperatures and resists salt water corrosion.

How do you change the strap on an Oris Divers 65 watch?

Strap replacement requires a spring bar tool. Insert the flat tip into the lateral slot of the pin, gently lifting until one end of the pin is released from its seat. Repeat on the other side. Remove the pin completely. Position the new strap on the lugs, reinsert the pin through the first lug, gently lower until the second lug seat engages, and secure. Verify that the pin is fully locked on both sides before wear.

Is an aftermarket strap compatible with the Oris Divers 65 01 733 7707 4397-Set?

Yes, any strap with 20-millimetre lugs is compatible. Verify that strap thickness at the lug area does not exceed 4-5 millimetres (bronze and stainless steel construction tolerates minimal variation). Artisanal straps with stainless steel pins and deployant buckles are preferable: they ensure durability and do not scratch the bronze case. Avoid straps with rough finishes that might oxidise the bronze.

How long does a leather strap last on a dive watch like the Divers 65?

A vegetable-tanned leather strap on a diver experiences greater stress than formal watch straps: humidity, sodium chloride (salt water), and UV exposure. With tannin tanning and hydrophobic treatment, expected lifespan is 3-4 years with moderate use (1-2 swims weekly). NATO or Fluoroelastomer rubber straps offer greater longevity (5-7 years) because they do not degrade with water exposure. Recommendation: rotate straps every 2-3 months during regular diver use, allowing complete drying between uses.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only