Oris · Divers 65
Strap for Divers Sixty-Five 40 Stainless Steel / Black / Rubber
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Divers 65 01 733 7707 4064-07 4 20 18
Selected for the 20 mm lug width
Vintage Brown Calfskin Strap — Natural Patina€98
Hammered Pink Strap with Ecru Stitching€98
Hammered Yellow Strap with Ecru Stitching€98
Grey Hammered Leather Strap with Ecru Stitching€98
Swift Red Leather Strap€120
Hammered calfskin strap in cuoio€98
The Divers 65 01 733 7707 4064-07 4 20 18, seen from the bench
Frequently asked questions
What is the lug width of the Oris Divers 65 01 733 7707 4064-07 4 20 18?
The lug width of this model is 20 millimetres. This measurement represents the physical distance between the two lugs on the case and determines which strap is compatible. An 18mm or 22mm strap will not fit correctly. You can verify compatibility by measuring the lug seat with a digital calliper or by consulting the original Oris instruction manual.
What is the best strap for the Oris Divers 65 01 733 7707 4064-07 4 20 18?
The ideal strap depends on intended use and personal aesthetic preference. To maintain vintage authenticity, we recommend an alligator with fine grain in intense hazelnut tone or vegetable-tanned calf in cognac colour. For professional diving purposes, a black FKM rubber strap remains the most resistant solution. A ballistic nylon NATO is the original equipment and guarantees rapid emergency change. All options must feature a 20mm lug width.
How do you change the strap on an Oris Divers 65?
To change the strap, you require a dedicated tool called a spring bar removal tool. Position the watch face-up on your work surface. Insert the rounded tip of the tool into the small hole beneath the lug and push upward to release the internal spring, then extract the metal lug. Repeat on the opposite side. Install the new strap by aligning the holes with the lugs and reinserting the springs until you hear the locking click. Consult the Oris manual if you lack experience.
Can I use an aftermarket strap compatible with my Oris Divers 65 01 733 7707 4064-07 4 20 18?
Yes, any strap with a 20mm lug width is technically compatible. However, we recommend selecting suppliers specialising in horology who guarantee precise tolerances and quality materials. A poorly constructed aftermarket strap may scratch the case lugs or loosen during wear. Always verify that the lugs are stainless steel and that the passants adhere to the case without excessive play.
How long does a leather strap last on a diving watch like the Divers 65?
A natural leather strap subjected to frequent water and moisture exposure has a lifespan of 18–36 months. Vegetable-tanned leather is more resistant than chrome-tanned calf, but it too suffers from marine humidity. For a diver used regularly in water, we recommend alternating between a leather strap and an FKM rubber one to extend the useful life of both. In a dry environment with regular maintenance (drying after bathing), a quality alligator can last 4–5 years. Replace the strap once you notice signs of fibre degradation.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
