Oris · Chronoris

Strap for Chronoris Date / Grey / Brown Leather

Takes 19 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width19 mm
Case diameter39 mm
Reference01 733 7737 4053-07 5 19 43
FamilyChronoris
MovementOris caliber Oris 733 Hours, Minutes, Seconds | Date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

The Chronoris 01 733 7737 4053-07 5 19 43, seen from the bench

The Chronoris represents the modern reinterpretation of an Oris chronograph from the 1970s. It is equipped with the Oris 733 caliber with hour, minute, second and date indication. The case features 19mm lugs for the strap.

Frequently asked questions

What is the lug width of the Oris Chronoris 01 733 7737 4053-07 5 19 43?

The lug width is precisely 19mm, measured as the internal distance between the two spring bar pins on the lugs. This measurement is a specific constructive feature of this model reference. Accurate measurement is essential before purchasing an aftermarket strap to prevent incompatibility or lateral movement that could compromise the watch's stability on the wrist.

What is the best strap for the 39mm Oris Chronoris with 19mm lug width?

The ideal strap depends on intended use. For formal occasions, we recommend vegetable-tanned alligator in warm fulvous or yellow tones, which enhances the steel case patina and complements the black sunburst dial. For daily wear, a textured calf leather in brown or black offers balance between elegance and practicality. For sporting activities or humid environments, a NATO fabric strap or FKM rubber provides superior water resistance and durability.

How do I change the strap on the Oris Chronoris 01 733 7737 4053?

Strap replacement requires a spring bar tool. Position the watch on a flat surface, insert the tool into the slot on the upper lug pin, gently lift until the spring retracts, and remove the pin. Repeat for the lower lug. Reverse the procedure with the new strap, ensuring the pin is fully seated and the spring is correctly repositioned. Use steady, careful pressure to avoid deforming the lugs.

Can I use a 20mm strap on this Oris Chronoris with 19mm lugs?

Although a 20mm strap can be forced onto 19mm lugs, this is not recommended. The lateral movement of the lug reduces wrist stability, compromises timekeeping accuracy, and applies excessive mechanical stress to the spring bar pins. The risk of accidental strap slippage increases significantly. Always use a strap that matches the official 19mm lug width specification.

How long does a leather strap last on a Chronoris?

Leather strap longevity depends on tanning method, leather quality, and usage conditions. A high-quality vegetable-tanned alligator strap (such as those offered by Milanostraps) can last 5-8 years with daily wear, developing a personalised patina that increases aesthetic value. Standard textured calf typically lasts 3-5 years. Regular exposure to moisture, extreme heat, or perspiration significantly shortens strap life. Proper maintenance—gentle cleaning and annual conditioning—substantially extends durability.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only