Oris · Big Crown
Strap for Oris Big Crown 01 733 7629 4263
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Big Crown 01 733 7629 4263
Selected for the 22 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Hammered Calfskin Strap Light Blue€98
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Vintage Olive Green Calf Leather Watch Strap€80
Hammered Black Calfskin Strap — Ecru Stitching€98
The Big Crown 01 733 7629 4263, seen from the bench
Frequently asked questions
What is the lug width of the Oris Big Crown 01 733 7629 4263?
The lug width of the Oris Big Crown 01 733 7629 4263 is 22 millimetres. This measurement is the internal space between the two metal lugs on the case where the strap attaches. To verify this accurately, use a digital calliper positioned parallel to the lugs. An incorrect measurement results in purchasing an incompatible strap, so we recommend consulting the official Oris documentation before ordering.
Which strap is recommended for the Oris Big Crown 01 733 7629 4263?
For the Big Crown 01 733 7629 4263, we primarily recommend an alligator strap in vegetable tanning, which reflects the aviatory character and develops a natural patina over time. An elegant alternative is vegetable-tanned calf leather in dark tones (black, grey, burgundy). If you prefer a more tactile solution with resistance to moisture, a NATO strap in regenerated cotton in military green or beige maintains the model's authentic spirit. Vulcanised rubber remains the most practical choice for those requiring constant water resistance.
How do I change the strap on the Oris Big Crown 01 733 7629 4263?
The strap of the 01 733 7629 4263 is replaced using a spring bar remover tool to extract the metal pins connecting the strap to the case lugs. Place the watch on a soft surface to prevent scratches. With the remover, gently press inward on one pin until the strap loosens, then repeat on the other side. Remove the old strap and insert the new one by aligning the holes with the pins, pressing until you hear a click. If you are unfamiliar with the procedure, consult a professional watchmaker.
Can I use an aftermarket strap on the Oris Big Crown 01 733 7629 4263?
Yes, it is fully compatible. The Oris Big Crown 01 733 7629 4263 uses standard lugs and buckles, so any 22-millimetre strap will be mechanically compatible. We recommend choosing specialised artisans who understand the proportions of the watch: a lower-quality strap or one with poor finishing compromises visual balance. A vegetable-tanned alligator strap from a skilled craftsman or a premium NATO in regenerated fibres improves the wearing experience considerably compared to generic straps.
How long does a leather strap last on an Oris Big Crown 01 733 7629 4263?
The lifespan of a leather strap depends on material quality and usage. A vegetable-tanned alligator strap, worn daily under normal conditions, has an average life of 5–7 years before showing visible wear (thinning, micro-cracks on the surface). Vegetable-tanned calf leather is slightly more delicate, lasting 4–6 years. In high-humidity environments, frequent salt exposure, or prolonged direct sunlight, lifespan reduces by 30–40%. A NATO in regenerated cotton lasts longer (7–10 years) because textile fibre is inherently more resistant to environmental factors. Proper maintenance (regular drying, annual leather conditioning) significantly extends the strap's lifespan.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
