Oris · Aquis

Strap for Aquis Date 41.5 Stainless Steel / Green / Rubber

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter42 mm
Reference01 733 7766 4157-07 4 22 64FC
FamilyAquis
MovementOris caliber Oris 733 Hours, Minutes, Seconds | Date
CaseCeramic, Stainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Aquis 01 733 7766 4157-07 4 22 64FC

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Aquis 01 733 7766 4157-07 4 22 64FC, seen from the bench

The Oris Aquis is a diver's watch powered by the Oris 733 caliber with hour, minute, second, and date functions. The reference 01 733 7766 4157-07 4 22 64FC features 22mm lugs. The movement provides the essential time indications with a date complication.

Frequently asked questions

What is the lug width of the Oris Aquis 01 733 7766 4157-07 4 22 64FC?

The lug width of the Oris Aquis 01 733 7766 4157-07 4 22 64FC is 22 millimetres. This measurement refers to the distance between the two lugs (the pins holding the strap on the case). When purchasing an aftermarket strap, ensure it is compatible with this specific lug width to avoid installation issues.

What strap is recommended for the Oris Aquis 01 733 7766 4157-07 4 22 64FC?

For the Oris Aquis 01 733 7766 4157-07 4 22 64FC, vegetable-tanned Tuscan leather straps represent the most balanced aesthetic choice, as they soften the technical geometry of the ceramic and steel case. However, NATO textile straps and vulcanised FKM rubber also offer excellent technical performance, especially if frequent diving or water activities are anticipated. The choice depends on primary use: daily elegance for leather, versatility for NATO and rubber.

How do you change the strap on the Oris Aquis 01 733 7766 4157-07 4 22 64FC?

Changing the strap on the Oris Aquis 01 733 7766 4157-07 4 22 64FC requires a spring bar tool (a small leverage device designed to extract the elastic pins). Position the tool in the lower notch of the pin, gently lever until the internal spring retracts, then extract the pin from the case. Repeat on the opposite side, then insert the pins into the new strap, align the holes, and compress using the same tool until you hear or feel a click. Perform this operation on a clean surface to prevent pin loss.

Are there aftermarket straps compatible with the Oris Aquis 01 733 7766 4157-07 4 22 64FC?

Yes, the Oris Aquis 01 733 7766 4157-07 4 22 64FC is compatible with any quality strap in 22mm size. Specialist suppliers such as Milano Straps offer straps in vegetable-tanned Tuscan leather, shell cordovan, alligator, textile NATO, and FKM rubber, all tested for dimensional compatibility and durability. It is important to verify that the internal holes (passants) of the strap are calibrated to accommodate the pins without mechanical stress.

How long does a leather strap last on the Oris Aquis 01 733 7766 4157-07 4 22 64FC?

The lifespan of a leather strap on the Oris Aquis 01 733 7766 4157-07 4 22 64FC depends on the material, treatment, and frequency of use. Vegetable-tanned Tuscan leather, worn daily, typically lasts 3–4 years before showing significant wear; shell cordovan, being denser, can reach 5–6 years. However, the strap does not 'end': vegetable leather develops a fascinating patina over time, and repair by a specialist craftsperson (such as Casati Milano by appointment) can significantly extend its useful life. Prolonged exposure to moisture, chlorine, and saltwater reduces durability; in such cases, choose rubber or NATO for the summer months.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only