Nomos Glashütte · Tetra

Strap for Tetra² Maßliebchen

Takes 18 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width18 mm
Case diameter30 mm
Reference460
FamilyTetra
MovementNomos Glashütte caliber Alpha hours, minutes, small seconds
Year2011
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Tetra 460

Selected for the 18 mm lug width · workshop selection

All 18 mm straps →

The Tetra 460, seen from the bench

The Tetra was introduced by Nomos Glashütte as a three-hand watch with a square case. It mounts the manual Alpha calibre with hour, minute and small seconds indication. Case with 18mm lugs and the square bezel characteristic of the collection.

Frequently asked questions

What is the lug width of the Nomos Glashütte Tetra 460?

The Nomos Glashütte Tetra 460 features a lug width of 18 mm. This measurement represents the distance between the two horizontal pins that secure the watch strap. All straps manufactured to the standard 18 mm lug width specification are fully compatible with this model. To verify aftermarket strap compatibility, ensure it is specifically designed for an 18 mm lug width.

What is the best strap for the Nomos Tetra 460?

The optimal strap for the Tetra 460 depends on intended use and aesthetic preference. For formal elegance, vegetable-tanned alligator in grey or navy blue amplifies the Bauhaus geometry of the case. For daily versatility, German calf leather with natural grain in grey-taupe or black offers comfort and ageing patina. For dynamic wear, cotton NATO in pure black or tortora ensures durability. Fluoroelastomer rubber suits sportive-formal contexts. The guiding principle: select a strap that does not visually compete with the case's sobriety.

How do I change the strap on a Nomos Tetra 460?

Strap replacement is straightforward: position the watch with the lugs facing upward. Use a spring bar tool—a small forked implement with a bifurcated tip—to compress the elastic pin securing the strap to each lug. Extract the horizontal pin from its housing and remove the strap. Insert the new strap into the opposite lug, align the pin with the hole, and compress again to secure. Repeat on the other side. If unfamiliar with the procedure, entrust the task to a qualified watchmaker—the Tetra 460 warrants expert handling.

Can I use an aftermarket strap on a Nomos Tetra 460?

Yes, any aftermarket strap with an 18 mm lug width is compatible with the Tetra 460. Select brands specialising in artisanal straps—such as those available on milanostraps.it—that guarantee construction quality and finishing befitting a watch of this calibre. Verify that strap thickness does not exceed approximately 4 mm to prevent excessive play in the case's housing. A high-quality aftermarket strap can substantially transform the daily personality of the Tetra 460.

How long does a leather strap last on a Nomos Tetra 460?

Leather strap durability depends on tanning method and usage patterns. An alligator strap with vegetable tanning, worn daily with rotation among other straps, typically lasts 3–5 years before repair or lug replacement becomes necessary. Calf leather, being softer, has comparable longevity. If worn occasionally, lifespan may extend to 7–10 years. Natural leather ageing—patina formation—is desirable and does not constitute deterioration. A NATO cotton-polyester strap endures 5–8 years of intensive wear. To preserve the strap, avoid prolonged exposure to excessive water and humidity.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only