Kobold · Soarway

Strap for Soarway Diver Seal Stainless Steel / Black

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter44 mm
ReferenceKD 1172142
FamilySoarway
MovementETA caliber 2824-2 No date hours, minutes, seconds
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Soarway KD 1172142

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Soarway KD 1172142, seen from the bench

The Kobold Soarway KD 1172142 is a tool watch designed for aviation and demanding environments, featuring a 44.00 mm stainless steel case with high contrast dial and luminescent indices. Powered by the reliable ETA 2824-2 caliber without date, it delivers chronometer-grade precision in a simplified, functional design. The 22 mm lug width accommodates quality straps while maintaining proportional visual balance for this 44 mm case diameter.

Frequently asked questions

What is the exact lug width of the Kobold Soarway KD 1172142?

The lug width of the Kobold Soarway KD 1172142 is 22 mm. This measurement represents the distance between the two spring bar pins of the case where the strap attaches. To verify strap compatibility, measure with a digital calliper the gap between the centre of one lug and the other: it must measure exactly 22 mm.

Which strap is recommended for the Kobold Soarway KD 1172142?

The Kobold Soarway KD 1172142, being an aeronautical tool watch, pairs excellently with: alligator (for tactile elegance and patina development), vegetable-tanned calf (especially in cognac or dark brown tones), technical NATO fabric (for practicality and quick changes) and FKM rubber (for operational environments, marine use or extreme temperatures). Your choice depends on usage: for intensive aeronautical operations, rubber or NATO are ideal; for daily wear, alligator or vegetable-tanned calf provide refinement.

How do I change the strap on the Kobold Soarway KD 1172142?

Position your watch with the strap facing upwards. Using a spring bar removal tool, insert the thin tip into the small hole beside the spring of the pin and gently push outward. The spring will compress, allowing you to extract the pin. Repeat on the other side. Insert the new pins into the replacement strap, align the lugs and press until you feel a click of closure. Verify that the pin is completely seated before wearing the watch.

Can I use an aftermarket strap with the Kobold Soarway KD 1172142?

Yes, absolutely. Any strap with a 22 mm lug width is compatible with the KD 1172142. Quality aftermarket straps (alligator, vegetable-tanned calf, technical NATO, rubber) often offer superior craftsmanship and colour selection compared to original straps. Ensure the strap has adequate thickness (approximately 4–5 mm) to prevent excessive play between the case lugs.

How long does a leather strap last on the Kobold Soarway KD 1172142?

A quality leather strap (alligator or vegetable-tanned calf) typically lasts 3–5 years with daily use, depending on frequency of wear, sun exposure and humidity, and maintenance. Vegetable-tanned leather develops patina over time, improving aesthetically whilst remaining functional beyond 5 years if kept dry. FKM rubber straps have a longer lifespan (7–10 years) due to their resistance to atmospheric agents. To extend the life of a leather strap, avoid prolonged exposure to saltwater, keep it dry and, if possible, rotate it with a second strap to reduce wear.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only