Unimatic · Modello Quattro

Strap for Modello Quattro U4S-MEOG Claesson Koivisto Rune

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter40 mm
ReferenceU4S-MEOG
FamilyModello Quattro
MovementSellita caliber SW200-1 b hours, minutes, seconds
Year2023
CaseYellow Gold

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Modello Quattro U4S-MEOG

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Modello Quattro U4S-MEOG, seen from the bench

The Unimatic Modello Quattro U4S-MEOG features the automatic Sellita SW200-1 caliber with hour, minute and second functions. The watch has 22mm lugs and an essential construction according to the minimalist design of the Italian brand. The Swiss movement ensures a standard power reserve for a timepiece with clean and functional lines.

Frequently asked questions

What is the lug width of the Unimatic Modello Quattro U4S-MEOG?

The lug width of the Unimatic Modello Quattro U4S-MEOG is 22 millimetres. This dimensional specification is the result of proportional calculation between the 40mm case and the lateral lugs: a balance engineered to ensure visual stability without aesthetic compromise. Any strap designed for this lug width will fit perfectly without lateral play.

What is the recommended strap for the Modello Quattro U4S-MEOG?

There is no single optimal choice: selection depends on usage context and personal preference. An alligator strap with traditional tanning amplifies nobility without betraying the industrial spirit; vegetable-tanned calf leather proposes a more austere, sustainable approach; a NATO in cotton or reinforced nylon introduces daily practicality; vulcanised rubber represents the extreme limit of functionality. The yellow gold of the U4S-MEOG demands straps that do not compete for visual attention but rather amplify the metal's tone.

How do I change the strap on a Unimatic Modello Quattro U4S-MEOG?

The Modello Quattro employs straight spring bar lugs: a dedicated tool is required to depress the internal spring and extract the bar from its seat. Position the watch on a soft surface, access the case sides, and with decisive yet controlled movement, push the tool until the bar disengages. Insert the new strap by aligning the holes with the lugs and press until the locking click is felt. The operation requires only seconds and guarantees complete security.

Can I use an aftermarket strap on this Modello Quattro?

Yes, absolutely. The U4S-MEOG is compatible with any strap engineered for the 22mm lug width specification. Quality aftermarket straps guarantee the same solidity and reliability as original equipment, with the advantage of access to specific materials (alligator, shell cordovan, vegetable tanning) and chromatic customisation possibilities. Always verify that the lug width is 22mm to avoid incompatibility.

How long does a leather strap last on a Unimatic Modello Quattro?

Durability depends on leather quality, frequency of use, and environmental conditions. A vegetable-tanned leather of medium thickness (1.4–1.6mm) typically lasts 3–5 years under moderate daily wear. Natural leather ages, develops patina, and may require maintenance (oiling, periodic cleaning). An alligator strap, more resistant, can exceed 7–8 years of service. The yellow gold of the U4S-MEOG ages in parallel with leather, creating a shared narrative of visual transformation.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only