Tudor · 1926

Strap for 1926 39 Stainless Steel / Opaline / Strap

Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width21 mm
Case diameter39 mm
Reference91550-0010 (aka: M91550-0010)
Family1926
MovementTudor caliber T601 Hours, Minutes, Seconds | Date
CaseStainless Steel

Spring bar

Spring bars for Tudor

The right category for this model · choose the 21 mm size

Straps for the 1926 91550-0010 (aka: M91550-0010)

Selected for the 21 mm lug width · workshop selection

All 21 mm straps →

The 1926 91550-0010 (aka: M91550-0010), seen from the bench

The Tudor 1926 M91550-0010 is a 39mm stainless steel watch with a manual-wound T601 caliber movement. It features hours, minutes, seconds, and date functions, housed in a cylindrical case with marked lugs. The 21mm lug width requires specific straps and is calculated to match the case diameter and European wrist anatomy. A satin-finished bezel ensures optimal legibility without unwanted reflections, while the dial maintains timeless simplicity.

Frequently asked questions

What is the exact lug width of the Tudor 1926 91550-0010?

The lug width of the Tudor 1926 M91550-0010 is precisely 21mm. This measurement is exact and tolerates no variance: the strap must fit snugly between the two lugs without lateral play. To verify compatibility, measure the internal distance between the two lugs with a ruler positioned perpendicular to the case. A loose strap compromises both stability and wearing comfort.

Which strap material is recommended for the Tudor 1926 91550-0010?

For the Tudor 1926 91550-0010, four material categories are ideal: alligator (for aesthetic contrast and natural grain texture), vegetable-tanned calf (for natural patina development over time), shell cordovan (for introverted elegance and deep colour), or technical rubber (for daily versatility). Material choice depends on dial colour: on light dials, brown alligator creates dynamic contrast; on dark dials, grey-slate calf develops smoky patinas. For sporty aesthetics, NATO fabric maintains colour reversibility.

How do I change the strap on a Tudor 1926 91550-0010?

The Tudor 1926 91550-0010 uses removable lugs accessible via spring bar fasteners. Proceed as follows: secure the watch with the strap facing upward, locate the thin pin passing through the lug, use a dedicated spring bar tool to press the small side button of the pin and slide it laterally, extract it gently. Insert the new strap, align the holes to the lug, and push the pin until you hear a locking click. Do not force: the pin should move fluidly without resistance.

Must the compatible strap for the Tudor 1926 91550-0010 be original Tudor?

No, the strap need not be original Tudor. Any strap with 21mm lug width is technically compatible, provided it meets adequate construction quality standards. Personalised leather straps from specialist ateliers often offer superior quality compared to factory options, allowing you to choose leather type, colour, thread type, and length. Technical compatibility is guaranteed solely by the 21mm width measurement.

How long does a leather strap last on a Tudor 1926 91550-0010?

A quality leather strap on a Tudor 1926 91550-0010, worn daily, has an average lifespan of 3-5 years with routine maintenance (drying after humidity exposure, avoiding extreme creasing). Vegetable-tanned calf ages more slowly (5-7 years); shell cordovan more rapidly (2-3 years) as the leather is thinner. Longevity depends on exposure to perspiration, humidity, and heat. Technical rubber straps last 4-6 years before losing elasticity. Casati Milano guarantees 18 months on personalised bespoke straps.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only