Steinhart · Pilot

Strap for Nav B-Uhr 44 Handwinding Bronze

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter44 mm
ReferenceF0320
FamilyPilot
MovementETA caliber 6497-1 hours, minutes, small seconds
CaseBronze, Stainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Pilot F0320

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Pilot F0320, seen from the bench

The Steinhart Pilot F0320 is a contemporary interpretation of the German Fliegeruhr, featuring a 44 mm bronze case with a black dial, Arabic numerals, and oversized crown. Powered by the ETA 6497-1 manual Swiss movement with hours, minutes, and small seconds, it combines aviator functionality with mechanical reliability. The 22 mm lug width accommodates structured straps proportionally suited to the case diameter, balancing visual coherence and versatility.

Frequently asked questions

What is the exact lug width of the Steinhart Pilot F0320?

The Steinhart Pilot F0320 features a 22-millimetre lug width. This measurement represents the usable space between the case lugs, into which the strap inserts. To verify compatibility, measure the internal space with a calliper or thin ruler. All straps measuring 22 millimetres are compatible with this model.

Which strap is most suitable for the Steinhart Pilot F0320?

For the F0320, we recommend three options in order of aesthetic coherence: 1) Military NATO webbing in cotton for aviation authenticity; 2) Calf leather in vegetable tanning with dark tones for formal evolution and ageing patina; 3) Alligator in vegetable tanning if you prefer structured elegance. FKM rubber is ideal for frequent water use. Choice depends on intended use context and preference between leather's emotional value and synthetic practicality.

How do you change the strap on a watch with 22mm lugs?

Strap replacement requires minimal tools: 1) Position the watch on a soft surface with lugs facing upward; 2) Locate the pins traversing the lugs; 3) Use a springbar tool (or a butter knife in emergency) to depress the spring beneath the pin; 4) Extract the pin completely; 5) Remove the worn strap; 6) Align the new strap to the lugs; 7) Reinsert the pin whilst maintaining pressure on the spring until it clicks. Repeat on the opposite side. The 22mm width is standard; the pin typically measures 1.8 millimetres.

Are aftermarket straps compatible with the Steinhart Pilot F0320?

Yes, entirely. Any strap with a 22-millimetre lug width is physically compatible with the F0320. Compatibility depends solely on the space width between the lugs, not the watch brand. Artisanal leather straps of superior quality, particularly those in vegetable tanning or shell cordovan, offer longevity and patina that often exceed original accessories, better reflecting the natural ageing aesthetic of bronze.

What is the typical lifespan of a natural leather strap?

Lifespan depends on construction density and daily wear: a cotton NATO resists 2-3 years of daily use; high-quality vegetable-tanned leather (calf, alligator, shell cordovan) lasts 3-5 years with occasional wear, to 2-3 years with daily wear. Vegetable tanning develops ageing patina that increases character but reduces resilience: fibres soften, material thins. When the strap begins to fray at edges or colour becomes irregular at fold points, replacement is due. Intermittent use and periodic cleaning (dry brushing) significantly extend useful life.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only