Sinn · Diving Watches

Strap for Diving Watch U1 W

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter44 mm
Reference1010.111
FamilyDiving Watches
MovementETA caliber 2824-2 Hours, Minutes, Seconds | Date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Diving Watches 1010.111

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Diving Watches 1010.111, seen from the bench

The Sinn 1010.111 belongs to the Diving Watches collection of the German brand. It is equipped with an automatic ETA caliber 2824-2 movement which offers hour, minute, second and date indication. The watch features 22mm lugs for the strap.

Frequently asked questions

What is the lug width of the Sinn Diving Watches 1010.111?

The Sinn 1010.111 features a lug width of 22mm. This measurement represents the internal distance between the two spring bars that support the strap. For accurate measurement, use a digital calliper positioned perpendicular to the case, avoiding approximations based on the original strap, as wear may produce imprecise readings.

What is the best strap for the Sinn 1010.111?

There is no universal solution; selection depends on intended use. A NATO strap in nylon ensures practicality and programmatic coherence with the watch's instrumental vocation. Alligator leather with vegetable tanning introduces elegance and develops patina over time. Smooth calf with a deployante combines aesthetic minimalism with rapid adjustment. For extended aquatic environments, a butyl rubber strap offers grip and reliability without compromise.

How do I change the strap on my Sinn 1010.111?

The Sinn 1010.111 uses standard spring bars. Proceed as follows: position the watch face-down on a soft surface; using a spring bar tool (or a small flat screwdriver), apply gentle inward pressure to one end of the spring bar until it jumps from its seat; repeat from the other side; remove the old strap. Insert the new strap by aligning the lug holes with the pins, then press firmly until the spring bars click into position, producing a tactile confirmation click.

Are there aftermarket straps compatible with the 1010.111?

Yes. Any strap with a 22mm lug width is theoretically compatible, but it is advisable to select specialised manufacturers who understand the aesthetic and functional proportions of an instrument at this level. Artisanal leather straps made with vegetable tanning or shell cordovan offer construction quality comparable to the watch itself. Always verify that the strap thickness at the lug does not exceed 4–5mm, to avoid anomalous stress on the spring bars.

How long does a leather strap last on the Sinn 1010.111?

Longevity depends on material, tanning method, and environmental exposure. Vegetable-tanned leather, if properly maintained and protected from prolonged moisture, has a useful life of 5–7 years under daily use. Shell cordovan can last 8–10 years or longer, owing to its dense fibrous structure. In marine environments, even the finest leathers deteriorate rapidly; for regular diving, a butyl rubber strap remains the most rational choice. Preventive maintenance—drying after aquatic exposure, periodic conditioning with natural waxes—significantly extends longevity.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only