Rolex · Sky-Dweller
Strap for Sky-Dweller Yellow Gold / Champagne / Oyster
Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Sky-Dweller 336938-0001 (aka: M336938-0001)
Selected for the 21 mm lug width · workshop selection
Red Alligator Strap Water Resistant€195
Matte Dark Brown Alligator Strap€195
Matte Grey Alligator Strap€195
Hammered calfskin strap in cuoio€98
Grey Hammered Leather Strap with Ecru Stitching€98
The Sky-Dweller 336938-0001 (aka: M336938-0001), seen from the bench
Frequently asked questions
What is the lug width of the Rolex Sky-Dweller 336938-0001?
The lug width of the Rolex Sky-Dweller 336938-0001 is 21 mm. This measurement refers to the internal distance between the two lugs of the case. To verify strap compatibility, measure precisely between the two attachment points: a 21 mm strap will fit perfectly, whilst 20 mm or 22 mm will create seating issues.
Which strap is recommended for the Rolex Sky-Dweller 42 in yellow gold?
For a Sky-Dweller 336938-0001 in 18 carat yellow gold, the most appropriate materials are alligator (with regular texture and brown, smoke grey, or burgundy tones), shell cordovan (horsehide leather with a glassy patina that evolves over time), and vegetable-tanned calf leather. Dark brown alligator with a yellow gold deployant clasp represents the standard of aesthetic coherence, whilst cordovan imparts cerebral sobriety. For more dynamic wearers, nautical textile or NATO straps in slate grey offer an engaging narrative contrast to the case's formality.
How do I change the strap on my Rolex Sky-Dweller?
Strap replacement requires specific tools: a spring bar remover and a stable flat surface. Position the watch with the case inverted, gently insert the tool tip into the release slot of the spring bar, push to compress the internal spring and extract the pin. Repeat on the other side. Insert the new strap by aligning the holes with the case lugs, then reinsert the pin by compressing the spring. Verify that the pin is fully seated. If the procedure generates uncertainty, consult a qualified watchmaker or Casati Milano for professional replacement.
Can I use an aftermarket strap from a different brand on a Rolex Sky-Dweller 336938-0001?
Yes. Any strap with a 21 mm lug width is mechanically compatible with the Rolex Sky-Dweller 336938-0001. Material and construction choice remain critical from an aesthetic and functional perspective. Straps from brands specialising in vegetable-tanned leather (such as Casati Milano) offer construction quality, longevity, and aesthetic evolution comparable to Rolex standards. Always verify that the lug width is exactly 21 mm and that the strap is proportioned for a 42 mm case.
How long does a leather strap last on a Rolex Sky-Dweller?
The lifespan of a leather strap depends on material, tanning method, and frequency of use. An alligator or vegetable-tanned shell cordovan, subjected to moderate daily use and maintenance (occasional cleaning, protection from excessive moisture), can last 4–7 years before showing structural failure (lug fracture, attachment deterioration). The visible patina that develops (darkening, wear marks) is a desirable characteristic, not a defect. A vegetable-tanned calf strap typically lasts 3–5 years under the same criteria. Store the watch in dry environments and replace the strap when signs of fatigue (deep fissures, torn filaments) become evident. Casati Milano warrants 18 months against manufacturing defects, independent of wear use.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only

