Rolex · Day-Date 36
Strap for Day-Date 36 Platinum Domed / President / Cherry
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Day-Date 36 118206-0121
Selected for the 20 mm lug width · workshop selection
Matte Dark Gray Alligator Strap€195
Black Alligator Strap with Light Red Edging€149
Vintage Alligator Strap Cognac€195
Hammered Pink Strap with Ecru Stitching€98
Vintage Brown Calfskin Strap — Natural Patina€98
The Day-Date 36 118206-0121, seen from the bench
Frequently asked questions
What is the exact lug width of the Rolex Day-Date 36 reference 118206-0121?
The lug width of the Day-Date 36 118206-0121 is 20 millimetres. This measurement is specific to the 36mm Day-Date models and is incompatible with the Day-Date 40 (22mm lug width). To verify precisely, use a digital calliper, placing the measuring points on the internal seating of the lug where the springbars insert into the case.
Which strap material is most suitable for pairing with the platinum Day-Date 36?
Alligator leather with vegetable tanning is the quintessential formal choice, as its natural grain amplifies the platinum case's sophistication. Shell Cordovan offers rapid patina development and warmth, ideal for daily wear. Dark calfskin creates striking contrast against the cool luminosity of platinum, emphasising contemporary design. For versatility, NATO canvas in grey or navy blue delivers décontraction whilst maintaining elegance throughout the day.
How should I correctly change the strap on a Rolex Day-Date 36 without damaging the lugs?
Use a dedicated springbar removal tool—either a spring bar extractor or a blunt small screwdriver. Position the tip beneath the spring hook, apply gentle downward pressure until the lug is freed, then extract the springbar. Repeat on the opposite side. To install the new strap, insert the springbar into the strap's pre-drilled holes, then lower the spring again. Verify the strap sits perfectly centred on the case before wearing.
Will a 20mm aftermarket strap function perfectly on an original Day-Date 36 118206-0121?
Yes, a 20mm aftermarket strap is mechanically compatible. However, construction quality and material finish are essential considerations, as the platinum Day-Date 36 deserves a strap matching Rolex's own exacting standards. Artisanal straps—such as those from Casati Milano—allow complete customisation whilst maintaining construction excellence and guarantees against manufacturing defects.
What is the typical lifespan of a natural leather strap when worn daily on the Rolex Day-Date 36?
Durability depends on material and wearing frequency. Alligator or vegetable-tanned Shell Cordovan, worn daily, develops appreciable patina within 6–8 months and maintains structural integrity for 2–4 years before replacement becomes necessary. Calfskin nappa is less resilient, approximately 18–24 months. Exposure to humidity, perspiration and thermal fluctuations accelerates deterioration. Periodic protection with natural waxes (not synthetic polymers) and storage away from heat sources significantly extends functional lifespan.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only

