Omega · Speedmaster (Non-Moonwatch)
Strap for Speedmaster Professional Moonwatch Co-Axial Stainless Steel / Enamel / Bracelet
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Speedmaster (Non-Moonwatch) 311.30.44.50.01.001 (aka: 31130445001001)
Selected for the 22 mm lug width · workshop selection
Matte Blue Alligator Strap€195
Matte Dark Brown Alligator Strap€195
Matte Grey Alligator Strap€195
Hammered Calfskin Strap Light Blue€98
Hammered Yellow Strap with Ecru Stitching€98
The Speedmaster (Non-Moonwatch) 311.30.44.50.01.001 (aka: 31130445001001), seen from the bench
Frequently asked questions
What is the lug width of the Omega Speedmaster (Non-Moonwatch) 311.30.44.50.01.001?
The Omega Speedmaster 311.30.44.50.01.001 has a lug width of 22mm. This dimension is specific to the model and corresponds to the internal distance between the two lugs of the case. To verify the correct measurement, position a ruler between the vertical shoulders of the lugs: it should read exactly 22mm. An incorrect measurement results in poor strap fit with undesirable lateral play.
Which strap is best for the Omega Speedmaster (Non-Moonwatch) 311.30.44.50.01.001?
The best choice depends on intended use and aesthetic preference. For formal elegance, grey-tortoiseshell alligator or grained calf in navy and burgundy enhance the brushed steel case. For daily dynamism, FKM rubber in dark grey or black maintains tactile resistance. Red-burgundy shell cordovan represents the compromise between refinement and chromatic evolution over time thanks to vegetable tanning. The ideal thickness for the 44.25mm case is 1.5-1.8mm to avoid visual disproportion.
How do you change the strap on the Omega Speedmaster (Non-Moonwatch) 311.30.44.50.01.001?
Position the watch on a soft cloth with the case facing upward. Use a spring bar tool (double-ended teflon instrument) by inserting the thin tip between the case lug and the strap lug. Apply gentle upward pressure to compress the internal spring pin, then slide the old strap laterally. Repeat on the other side. For the new strap, align the spring pin with the lug hole and slide the strap until the pin engages audibly. Do not force: correct engagement requires no violence.
Is an aftermarket strap compatible with the Omega Speedmaster (Non-Moonwatch) 311.30.44.50.01.001?
Yes, provided it has a 22mm lug width. On milanostraps.it you will find a selection of artisanal 22mm straps checked for compatibility with this Omega model. Always verify that the strap has no flange (protruding shoulder) that would prevent insertion into the lugs. Casati Milano straps are custom-made and guarantee perfect engagement with watch-grade spring pins.
What is the average lifespan of a leather strap for the Omega Speedmaster (Non-Moonwatch) 311.30.44.50.01.001?
A quality watchmaking leather strap typically lasts 3-5 years with moderate daily use. Lifespan depends on sun exposure, moisture, and frequency of use. Naturally tanned leather tends to stiffen with age, while alligator maintains greater elasticity. To extend lifespan, avoid prolonged contact with fresh water, untreated perspiration, and heat sources. Casati Milano straps benefit from an 18-month warranty and can be regenerated with leather renewal services.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only

