Mühle Glashütte · Teutonia
Strap for Teutonia III Handaufzug Kleine Sekunde White / Bracelet
Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Teutonia M1-08-11-MB
Selected for the 22 mm lug width · workshop selection
Recycled Nylon Military Strap — Grey with Red Stitching€52
Light Blue Recycled Military Strap with Red Stitching€52
Eco Recycled Nylon Military NATO Strap — Green with Green Stitching€52
Recycled Nylon Military NATO Strap — Red and Black Edges€52
Eco-Friendly Recycled Nylon Military NATO Strap — Green with Orange Edges€52
The Teutonia M1-08-11-MB, seen from the bench
Frequently asked questions
What is the lug width of the Mühle Glashütte Teutonia M1-08-11-MB?
The Mühle Glashütte Teutonia M1-08-11-MB features a lug width of 22mm. This dimension is critical for aftermarket strap compatibility. To verify it, use a digital calliper and measure the perpendicular distance between the two lugs at 12 and 6 o'clock: the value should be approximately 22mm. This measurement ensures that any strap sits correctly without excessive play.
What is the best strap for the Teutonia M1-08-11-MB?
The optimal strap depends on intended use and aesthetic preference. For classical wear, we recommend vegetable-tanned Tuscan leather in Havana, which replicates the factory configuration and develops golden patina over time. For formal occasions, alligator leather provides three-dimensionality through natural dorsal scutes. NATO straps in Cordura canvas remain the ideal choice for humid environments or sporting activities, thanks to moisture resistance and rapid drying.
How do you change the strap on the Teutonia M1-08-11-MB?
Strap replacement is straightforward. Obtain a spring bar tool and locate the two small metal cylinders (spring bars) connecting the strap to the lugs. Position the tool flat beneath the spring bar and apply gentle downward pressure until the cylinder slides down, releasing one strap end. Repeat for the opposite side. To install the new strap, align the holes with the lugs and push the spring bar upward until it clicks into place. Avoid abrupt movements that could damage the lugs.
Are there compatible aftermarket straps for the M1-08-11-MB?
Yes, all straps with 22mm lug width are compatible with the Teutonia M1-08-11-MB. Milano Straps offers an extensive collection of artisanal straps in this dimension, crafted from Tuscan vegetable-tanned leather, Italian calf, alligator, shell cordovan, NATO in Cordura canvas and FKM rubber. Each strap is available in various finishes and colourways, allowing personalisation of the watch according to individual style and specific usage requirements.
How long does a leather strap last on the Teutonia M1-08-11-MB?
Leather strap longevity depends on frequency of wear, material quality and environmental conditions. A vegetable-tanned Tuscan leather strap, worn daily, maintains structural functionality for 4-6 years. The leather develops progressive patina and gradually hardens, but does not fail suddenly. Alligator, thanks to more robust fibrous structure, may last 8-10 years. NATO canvas straps exceed 10 years without degradation. FKM rubber retains elastic properties beyond 12 years. Excessive moisture and prolonged sun exposure accelerate ageing.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
