JeanRichard · 1681

Strap for 1681 Small Seconds Stainless Steel / Silver / Barenia

Takes 24 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width24 mm
Case diameter44 mm
Reference60330-11-133-HB20
Family1681
MovementJeanRichard caliber JR1090 Hours, Minutes, Small Seconds | Date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the 1681 60330-11-133-HB20

Selected for the 24 mm lug width · workshop selection

All 24 mm straps →

The 1681 60330-11-133-HB20, seen from the bench

The JeanRichard 1681 features the automatic caliber JR1090 with functions of hours, minutes, small seconds and date. The model with reference 60330-11-133-HB20 is equipped with 24mm lugs. The watch has a dial with an auxiliary seconds counter and date indication.

Frequently asked questions

What is the lug width of the JeanRichard 1681 60330-11-133-HB20?

The lug width is exactly 24 millimetres. This measurement is taken by positioning a ruler between the two metal lugs protruding from the case at 12 and 6 o'clock. The 24mm width is primarily found on large-format instruments and chronographs, making this timepiece compatible with a more specific selection of straps compared to standard 20mm or 22mm cases.

What strap is ideal for the JeanRichard 1681 60330-11-133-HB20?

For this model, we recommend shell cordovan in deep brown with natural patina, or Italian calfskin with traditional vegetable tanning. Both dialogue authentically with the artisanal ethos of the Geneva manufacture. Alternatively, NATO straps in Cordura fabric preserve the sporty character of the 44mm case without aesthetic compromise. For formal contexts, a midnight blue alligator leather complements the grey sunburst dial.

How do you change the strap on a JeanRichard 1681?

Strap replacement requires a spring bar tool or similar implement. Position the watch vertically with the lug facing upward. Insert the tool's tip into the small notch at the base of the lug, press gently until the spring retracts, then withdraw the metal bar. Repeat on the opposite side. To install the new strap, align the holes with the case's protruding lugs and push the bar into position until it clicks into the retaining seats. Verify full insertion before wearing the watch.

Can I use aftermarket straps compatible with the 24mm lug width?

Yes, any strap featuring a 24mm lug width is compatible with the JeanRichard 1681 60330-11-133-HB20. The lug width specification is universal: if it respects the 24mm dimension, the strap will fit perfectly on the case. Always verify that the spring bar is appropriately sized (typically 1.5 or 1.6mm diameter for watches in this category) and that the strap's overall length provides adequate coverage for your wrist.

What is the average lifespan of a natural leather strap?

A natural leather strap with vegetable tanning typically lasts between 4 and 7 years, depending on daily wear, perspiration exposure, and humidity conditions. Premium-quality leathers such as shell cordovan or fine calfskin develop an attractive patina over time and tend to last toward the upper range of this period. Regular maintenance—gentle cleaning with a damp cloth and periodic balm application—significantly extends strap lifespan and enriches its aesthetic character.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only