Glashütte Original · Senator
Strap for Senator Chronometer Red Gold / Silver / Alligator / Folding
Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Senator 1-58-01-02-05-30
Selected for the 21 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Saffiano Black Strap Tone Stitching€90
Vintage Brown Calfskin Strap — Natural Patina€98
Red Alligator Strap Water Resistant€195
The Senator 1-58-01-02-05-30, seen from the bench
Frequently asked questions
What is the lug width of the Glashütte Original Senator 1-58-01-02-05-30?
The lug width of the Glashütte Original Senator 1-58-01-02-05-30 is 21mm. This width is the standard attachment point for the 42mm case model and is determined by the case's proportional architecture. When replacing the strap, it is essential that the new strap possesses exactly 21mm lug width, as a narrower or wider strap would cause dangerous lateral play on the fixing pins.
Which strap is most suitable for the Glashütte Original Senator in red gold?
For the Senator in red gold, 42mm, slate-grey alligator represents the choice of formal purism, allowing the metal to emerge without aesthetic competition. Alternatively, Italian calfskin in vegetable tanning (brown or burgundy tones) creates natural tonal harmony with red gold. For more dynamic contexts, NATO strap in linen-cotton offers sport elegance without excessive formality. FKM rubber remains the optimal solution for marine environments or motor activities.
How do I change the strap on a watch with 21mm lug width?
Changing the strap on a watch with 21mm lug width requires: (1) Position the watch with the case facing upward; (2) Locate the attachment pins (screws or springs) at the strap ends; (3) Use a spring bar tool to depress the retention system and slide the pin outward; (4) Remove the old strap; (5) Insert the new strap (always 21mm) aligning the holes with the pins; (6) Ensure the pin clicks firmly into place. We recommend having this operation performed by a qualified watchmaker to avoid scratching the case.
Can I use an aftermarket strap compatible with my Senator 1-58-01-02-05-30?
Yes, you may use quality aftermarket straps on this model, provided they comply with the 21mm lug width specification. We recommend straps in alligator, vegetable-tanned or natural calfskin, or FKM rubber (for sport use cases). Avoid mediocre-quality straps, which may deteriorate rapidly or present poor manufacturing tolerances. An artisanal strap of superior quality will enhance usage versatility without compromising the mechanical integrity of the watch.
How long does a leather strap last on a watch like the Senator?
The lifespan of a leather strap depends on frequency of wear, environmental conditions, and tanning method. Vegetable-tanned calfskin, worn daily with moderate care, typically requires replacement every 2–3 years. Alligator, being a more robust and dimensionally stable leather, may last 3–4 years under normal conditions. Constant exposure to sunlight, humidity, and perspiration accelerates wear; periodic rest (alternating with other straps) will significantly extend useful life. Proper maintenance—regular cleaning with a damp cloth and thorough drying—preserves elasticity and tone over time.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
