Glashütte Original · SeaQ
Strap for SeaQ Panorama Date Stainless Steel / Black / Rubber - Pin
Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the SeaQ 1-36-13-01-80-06
Selected for the 21 mm lug width · workshop selection
Cognac Mohawk Leather Strap€95
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Saffiano Taupe Strap€90
Black and Yellow Driver Leather Strap€130
Swift Topo Leather Strap€120
The SeaQ 1-36-13-01-80-06, seen from the bench
Frequently asked questions
What is the lug width of the Glashütte Original SeaQ 1-36-13-01-80-06?
The lug width is 21 millimetres. This width is specific to the SeaQ model and is determined by the 43.20 mm case geometry. To verify it with precision, use a digital calliper to measure the internal distance between the two lug pins: the value should correspond to 21.00 ± 0.2 mm. Accurate measurement is essential to guarantee structural and aesthetic compatibility of the strap.
What strap is recommended for the Glashütte Original SeaQ 1-36-13-01-80-06?
For this timepiece, the most coherent materials are vegetable-tanned alligator – which develops natural patina over time – and gummed calf for intensive and nautical use. Dark brown or cognac alligator creates sophisticated colour accords with the satin-finished steel case, while structured rubber guarantees resistance to UV rays and salt water. The choice depends on the context of wear: lasting elegance for alligator, practicality for rubber.
How do you change the strap on the Glashütte Original SeaQ 1-36-13-01-80-06?
The SeaQ uses lugs without spring-bar attachments (solid pins welded to the case). To change the strap you need to: 1) obtain a pin remover tool or consult a specialist watchmaker; 2) position the watch with the lug facing upwards; 3) gently push the pin inward towards the outside using the remover; 4) insert the new strap and recalibrate the pin. DIY without proper tools is not recommended to avoid case damage.
Is an aftermarket strap compatible with the Glashütte Original SeaQ 1-36-13-01-80-06?
Yes, any strap with a 21 mm lug width is structurally compatible. However, it is essential to verify construction quality: the best aftermarket solutions employ vegetable-tanned leather of manufacturing grade or structured rubber with consistent thickness (approximately 4.5 mm). Generic thin straps risk altering the ergonomics and tactile perception of an instrument of this calibre. We recommend specialist craftsmen who guarantee precision in construction details.
How long does a leather strap last on the Glashütte Original SeaQ 1-36-13-01-80-06?
A quality vegetable-tanned alligator strap, with regular maintenance, typically lasts 4-6 years before requiring replacement. Durability depends on frequency of use, exposure to moisture and care: periodically apply balms specific to vegetable-tanned leather, avoid prolonged immersions and dry quickly after fresh water contact. The patina that develops over time is desirable and not an indicator of deterioration. A gummed calf offers longer average lifespan (6-8 years) due to polymer resistance.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
