Glashütte Original · SeaQ

Strap for SeaQ Date Stainless Steel / Black / Rubber / Pin

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter40 mm
Reference1-39-11-06-80-06
FamilySeaQ
MovementGlashütte Original caliber 39-11 hours, minutes, seconds | date
Year2019
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the SeaQ 1-39-11-06-80-06

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The SeaQ 1-39-11-06-80-06, seen from the bench

The Glashütte Original SeaQ features the automatic caliber 39-11 with hour, minute, second and date indications. The watch has 20mm lugs and a German-made manufacture movement. The model is characterized by its underwater construction and the functional design typical of the Saxon maison.

Frequently asked questions

What is the exact lug width of the Glashütte Original SeaQ 1-39-11-06-80-06?

The lug width of the Glashütte Original SeaQ 1-39-11-06-80-06 is precisely 20.00 mm. This measurement should be verified using a digital calliper applied to the internal surface of the lug, at the base where the material achieves maximum structural rigidity. A 20 mm strap will insert with optimal tolerance into the apertures of the stainless steel case.

Which strap is recommended to pair with the Glashütte Original SeaQ?

For the SeaQ 1-39-11-06-80-06, straps in crocodile leather with vegetable tanning (for natural patina development), shell cordovan from horse belly (for density and salt-water resistance), or technical nylon NATO (for post-immersion practicality) are recommended. The choice depends on the desired balance between tactile luxury and operational functionality. Cognac crocodile or rose mogany shell cordovan produce ideal chromatic pairings with the steel case.

How do you change the strap on the Glashütte Original SeaQ whilst maintaining dimensional precision?

Changing the SeaQ strap requires a spring bar tool with dual ball-ended tips. Position the tip inside the lug hole to compress the internal spring, remove the pin, extract the old strap. Insert the new strap (20 mm) aligning the lateral holes with the spring bar ends, then ensure the pin clicks into position. Verify that the strap sits equidistant on both sides of the case.

Is an aftermarket crocodile strap with vegetable tanning compatible with this model?

Yes, any 20 mm strap (the standard lug width for the SeaQ 1-39-11-06-80-06) is technically compatible. Artisanal crocodile straps with slow vegetable tanning prove particularly congruent aesthetically: the natural patina development over time dialogues with the evolving finish of the Glashütte steel case. Ensure the strap features an internal spiral spring to guarantee firm seating in the lugs.

What is the durability of a leather strap for the SeaQ under marine use conditions?

A quality leather strap (crocodile, shell cordovan, vegetable-tanned calf) subjected to frequent immersion has an average durability of 18-24 months before requiring replacement. Salt exposure accelerates fibre degradation. For intensive marine use, alternating leather straps with NATO or FKM rubber versions is advisable, allowing leather to dry completely between uses. Periodic maintenance with natural waxes extends useful life by 6-12 months.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only