Certina · DS Action
Strap for DS Action 43 Quartz Stainless Steel / Blue
Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the DS Action C032.451.11.047.00
Selected for the 21 mm lug width · workshop selection
Cognac Mohawk Leather Strap€95
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Saffiano Taupe Strap€90
Black and Yellow Driver Leather Strap€130
Swift Topo Leather Strap€120
The DS Action C032.451.11.047.00, seen from the bench
Frequently asked questions
What is the lug width of the Certina DS Action C032.451.11.047.00?
The lug width of the Certina DS Action C032.451.11.047.00 is 21 millimetres. This dimension represents the width of the springbar mounting points where the strap attaches to the case. To verify manually, use a digital calliper to measure the internal distance between the two lugs. All compatible straps must respect this standard measurement.
Which strap is recommended for the Certina DS Action C032.451.11.047.00?
For the Certina DS Action C032.451.11.047.00, several options are recommended depending on intended use. An alligator strap with vegetable tanning in pearl grey creates executive elegance whilst maintaining robustness. A cordura NATO in navy blue remains the classic sporting choice. Fluoroelastomer rubber is ideal for marine environments and intensive use. Naturally tanned calf leather offers pronounced patina and predictable ageing. The choice depends on the balance between formality and practicality you desire.
How do I change the strap on the Certina DS Action C032.451.11.047.00?
Strap replacement involves removing the springbars from both case ends using a dedicated tool (springbar tool). Position the tool tip into the springbar access hole, compress the internal spring, and extract the bar. Repeat for the opposite end. Insert the new strap's springbars into the same holes, ensuring the shoulders sit properly. No special tool is required if you select a NATO strap, which threads directly through the lugs without springbar removal.
Is an aftermarket strap compatible with the Certina DS Action C032.451.11.047.00?
Yes, any strap with a 21mm lug width is fully compatible with the Certina DS Action C032.451.11.047.00. Artisan-crafted straps of superior quality offer greater aesthetic versatility and durability than OEM alternatives. Always verify that the chosen strap is compatible with standard springbars and respects the 21mm width specification. Aftermarket straps enable colour and material customisation, adapting the instrument to your personal aesthetic.
How long does a leather strap last on the Certina DS Action C032.451.11.047.00?
A quality leather strap (alligator, vegetable-tanned calf) typically lasts 3–5 years with daily wear, depending on exposure to humidity and direct sunlight. Vegetable tanning ages elegantly, developing patina and naturally absorbing perspiration. To extend durability, avoid prolonged water immersion and allow complete drying after perspiration exposure. A rubber strap lasts 5–7 years whilst maintaining elasticity, whilst a cordura NATO can exceed 10 years if properly maintained. Periodic conditioning with natural oils (neatsfoot oil) preserves suppleness and significantly extends service life.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
