Unimatic · Modello Uno

Strap for Modello Uno GMT Titanium

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter42 mm
ReferenceU1S-TGMT
FamilyModello Uno
MovementETA caliber 2893-2 Hours, Minutes, Seconds, Additional 24 Hour Hand (adjustable) | Date
CaseTitanium

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Modello Uno U1S-TGMT

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Modello Uno U1S-TGMT, seen from the bench

The Unimatic Modello Uno U1S-TGMT is a GMT tool watch featuring a 41.50mm titanium brushed case with a 22mm lug width. It is powered by an ETA caliber 2893-2 movement with independent 24-hour GMT complication, hours, minutes, seconds, and date display. The sapphire crystal with anti-reflective coating and 300-meter water resistance define its professional specifications. Designed by Milan-based Unimatic, this timepiece combines contemporary minimalism with functional design.

Frequently asked questions

What is the lug width of the Unimatic Modello Uno U1S-TGMT?

The lug width of the Unimatic Modello Uno U1S-TGMT is 22mm. This specification represents the internal distance between the lug shoulders of the titanium case, which is the critical parameter for aftermarket strap compatibility. Do not confuse this with the external visible width; to verify accuracy, measure precisely from the internal shoulder to internal shoulder of the titanium lugs.

Which type of strap pairs best with the Modello Uno U1S-TGMT?

For the Modello Uno U1S-TGMT in brushed titanium, the most suitable straps are: vegetable-tanned leather in neutral tones (tobacco brown, black, cognac) for aesthetic balance, NATO-style straps in ballistic nylon for practical quick-change capability, or vulcanised rubber for marine environments. Selection depends on intended use: Italian calf leather for visible ageing, NATO for versatility, rubber for aquatic exposure.

How do I change the strap on my Unimatic Modello Uno U1S-TGMT?

The strap is replaced via the spring bar lugs at the case ends. Position the watch with the lug facing upward, locate the external spring bar (the small hole at the lug centre), and use a spring bar tool to compress the internal spring while withdrawing the old strap. Insert the new strap by aligning the holes with the internal shoulders (22mm apart), then release the spring. This operation requires approximately two minutes once practised.

Can I use a quality aftermarket strap with my U1S-TGMT?

Yes, any strap from a reputable manufacturer with 22mm lug width is fully compatible with the Modello Uno U1S-TGMT. Italian artisanal straps with vegetable tanning or premium construction techniques offer superior quality to OEM offerings, guaranteeing durability and aesthetic ageing. Always verify that lug width is precisely 22mm (shoulder to shoulder internally) and that the spring bars fit your case pin diameter appropriately.

What is the expected lifespan of a leather strap before replacement?

A quality leather strap with vegetable tanning typically lasts 3–5 years with moderate daily wear. Longevity depends on exposure to moisture, perspiration, UV radiation, and conditioning frequency. A well-maintained strap (periodically treated with natural leather balm) can exceed five years. Failure typically occurs at buckle level or seam integrity; the leather itself ages aesthetically but does not deteriorate if protected. FKM rubber or NATO straps demonstrate superior longevity (7–10 years) due to absence of organic degradable materials.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only