Tudor · Fastrider
Strap for Fastrider Black Shield Ceramic / Black-Sand / Alcantara
Takes 24 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Fastrider 42000CN-0016
Selected for the 24 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Hammered Calfskin Strap Light Blue€98
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Vintage Olive Green Calf Leather Watch Strap€80
Hammered Black Calfskin Strap — Ecru Stitching€98
The Fastrider 42000CN-0016, seen from the bench
Frequently asked questions
What is the lug width of the Tudor Fastrider 42000CN-0016?
The Tudor Fastrider 42000CN-0016 features a lug width of 24mm. This dimension is model-specific, determined by the generous 42-millimetre case diameter and the integration of the robust screw-down pushers on this chronograph. To verify compatibility, measure the distance between the two case lugs where the strap attaches, from shoulder to shoulder: it must be exactly 24mm. A narrower lug width would compromise stability, whilst a wider one would not converge into the attachments properly.
Which strap is recommended for the Tudor Fastrider 42000CN-0016?
For the 42000CN-0016, we recommend three principal categories: genuine alligator for formal occasions and evening wear (delivers uncompromising elegance), vegetable-tanned calf for versatile daily use (develops natural patina over time), and FKM rubber in fine grain for sports and marine activities (maximum moisture resistance and stability). The black ceramic case pairs exceptionally with straps in absolute black, taba brown, dark blue, or burgundy. Each choice depends on predominant use and the desired balance between formality and sportiveness.
How do you change the strap on a watch with 24mm lugs?
Changing the strap on a 24mm lug watch requires a dedicated tool called a spring bar remover. Position the watch on a soft cloth with the case facing upward. Insert the spring bar tool into the gap between the case lug and the existing strap, gently lift the internal spring lever until the lug disengages. Repeat for both sides. To install the new strap, insert the lug into the designated holes and press firmly until you hear a 'click' of confirmation. Verify that both sides are securely fastened before wearing the watch.
Are there aftermarket straps compatible with the Tudor Fastrider 42000CN-0016?
Yes, the aftermarket for 24mm lugs offers a rich selection of quality options. Milano Straps provides a comprehensive range of artisanal straps in alligator, calf, shell cordovan, rubber, and textiles, all precisely dimensioned for 24mm lugs. It is essential to verify that your chosen strap is expressly designated for this lug width: compatibility depends on measurement precision between attachments. Generic '24mm' straps from non-specialised suppliers may exhibit unacceptable tolerances, causing play or instability.
How long does a leather strap last on the Tudor Fastrider 42000CN-0016?
The longevity of a leather strap depends on tanning quality, fibre thickness, and intensity of use. Genuine alligator with vegetable tanning and thickness exceeding 1.5mm, worn daily, maintains structural integrity for 3–5 years. Vegetable-tanned calf typically lasts 2–4 years under regular use. FKM rubber straps, more resistant to moisture and ageing, exceed 7 years. Accelerated wear factors include prolonged humidity exposure, perspiration, and direct sunlight. Regular maintenance with specific conditioners and drying after water contact significantly extends the lifespan of any material.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
