TAG Heuer · Autavia

Strap for Autavia Isograph Calibre 5 Stainless Steel / Grey / Leather

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter42 mm
ReferenceWBE5111.FC8267
FamilyAutavia
MovementTAG Heuer caliber 5 Isograph hours, minutes, seconds | date | chronometer
Year2019
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Autavia WBE5111.FC8267

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The Autavia WBE5111.FC8267, seen from the bench

The TAG Heuer Autavia represents the modern reissue of a historic model from the Swiss house, originally launched in the 1960s. It features the automatic Isograph Caliber 5 with hours, minutes, seconds and date functions, certified as a chronometer. The WBE5111.FC8267 reference maintains the characteristic bicompax dial design typical of the collection.

Frequently asked questions

What is the lug width of the TAG Heuer Autavia WBE5111.FC8267?

The lug width (distance between lugs) of the TAG Heuer Autavia WBE5111.FC8267 is 20 millimetres. This is the exact measurement between the two attachment points on the case where the strap is fitted. Precision is critical: even a 0.5mm deviation will destabilise the strap-to-case interface and create unwanted micro-movement.

What is the best strap for the TAG Heuer Autavia WBE5111.FC8267?

The optimal strap depends on intended use: alligator or vegetable-tanned calf leather for formal and sports-elegant wear; NATO fabric (Cordura weave) for versatility and low maintenance; butyl rubber for marine or humid environments. For this 42mm stainless steel model, we recommend genuine American alligator or French calf leather with natural patina development, both capable of balancing the technical geometry of the case.

How do I change the strap on my TAG Heuer Autavia WBE5111.FC8267?

The TAG Heuer Autavia employs direct lugs without integrated deployant. To replace the strap, use a precision lug removal tool: position the watch on a stable surface, insert the removal pin into the lateral aperture beneath the lug spring, and push gently until the lug pin disengages fully. Repeat on the opposite lug. Perform this operation with care to avoid scratching the case. If uncertain, entrust the task to Casati Milano.

Are aftermarket straps compatible with the TAG Heuer Autavia WBE5111.FC8267?

Yes, provided they strictly observe the 20mm lug width specification. Milanostraps' artisanal straps are manufactured to millimetre tolerance and tested pre-shipment. Compatibility is not merely dimensional but also aesthetic and functional: a premium-quality strap elevates both user experience and longevity.

How long does a leather strap last on the TAG Heuer Autavia?

A premium alligator or calf leather strap typically endures 4–7 years of daily wear, contingent upon climate, humidity, and maintenance protocols. Vegetable-tanned leather, in particular, develops natural patina and hardens over time, affording inherent protection against mechanical stress. Casati Milano warrants all bespoke straps for 18 months and recommends periodic hydration using specialist leather cream formulated for horology, applied sparingly to avoid saturation.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only