Strap for Apollon Automatic

The Apollon AP1001 features a 24mm lug width. This measurement is defined as the internal distance between the two lugs on the case, measured from the inner edge of one lug to the inner edge of the opposite lug, passing underneath the case. Respecting this measurement is essential for correct strap compatibility.

A vegetable-tanned leather aged in tobacco is recommended, as it contrasts elegantly with the titanium case. Alternatively, shell cordovan provides natural water resistance, whilst a NATO textile transforms the instrument into a tactical variant. All options must comply with the 24mm lug width specification.

Strap removal requires access to the spring bars using a bifurcated spring bar tool. Position the tool under the lateral pin, apply gentle upward pressure to compress the internal spring, then slide the pin out of the lug. Repeat on the opposite side. Reverse the procedure to install a new strap. If unfamiliar with the process, consult a qualified watchmaker.

A quality leather strap, vegetable-tanned, typically lasts between 2 to 5 years under daily wear, depending on frequency of use, climate conditions and maintenance practices. Leather develops a characteristic patina and controlled creasing that defines the piece. To extend lifespan, keep the strap dry, avoid prolonged exposure to excessive humidity and heat, and clean periodically with appropriate products.

Yes, the Apollon AP1001 accepts any 24mm lug width strap from third-party suppliers. Milano Straps offers a specialised collection of compatible straps in leather, NATO and rubber, selected for proportions and quality. The aftermarket strap must feature spring bars of identical length and thickness to ensure mechanical stability.