SevenFriday · P-Series

Strap for P1/03 Industrial Essence Orange

Takes 28 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width28 mm
Case diameter47 mm
ReferenceP1/03
FamilyP-Series
MovementMiyota caliber 82S7 Additional 24 Hour Hand (fixed), Small Seconds, Hours, Minutes
CaseSilicone, Stainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

The P-Series P1/03, seen from the bench

The SevenFriday P1/03 belongs to the P-Series of the Swiss brand founded in 2012. It features the automatic Miyota 82S7 caliber with indication of hours, minutes, small seconds and a fixed 24-hour hand. The lugs measure 28mm in width.

Frequently asked questions

What is the lug width of the SevenFriday P-Series P1/03?

The lug width of the SevenFriday P-Series P1/03 is 28mm. This specific dimension reflects the modular architecture of the case and requires dedicated straps. Measurement is taken by measuring the distance between the internal attachment points of the lugs. For the P1/03, verifying compatibility at 28mm is essential to avoid play or forcing during installation.

Which strap pairs best with the SevenFriday P1/03?

For the P1/03, the best pairings are an alligator strap with vegetable tanning in black or a Togo grain chromium-tanned calf, which create elegant contrast with the case's austerity. Alternatively, a NATO strap in ballistic nylon or an FKM rubber strap maintains the sport-industrial soul of the watch, emphasising its contemporary tool watch vocation without aesthetic compromise.

How do you change the strap on the SevenFriday P1/03?

To change the P1/03 strap, proceed as follows: remove the watch from your wrist and position it on a soft surface (watchmaker's pad). Locate the lateral pins securing the strap to the case lugs (approximately 28mm long). Using a spring bar tool, push the pin from the inside outward to release the internal spring, then extract it completely. Repeat on the other side. Insert the new strap by aligning the holes with the pin position, compress the spring with the spring bar tool, and snap the pin into place. Verify that both sides are secure before wearing the watch again.

Is an aftermarket strap compatible with the SevenFriday P1/03?

Yes, provided the aftermarket strap is specifically designed for a 28mm lug width. The P1/03's lugs have a precise width of 28mm and require dedicated straps. Avoid DIY adaptations on standard straps (20mm, 22mm), as these would compromise both aesthetics and security. Milano Straps offers a curated selection of 28mm-compatible straps, verified for fit and construction quality.

What is the lifespan of a leather strap for the SevenFriday P1/03?

The lifespan of a leather strap depends on the material and usage. A vegetable-tanned alligator or quality chromium-tanned calf develops a natural patina over time (6–12 months) and remains functional for 3–5 years with regular maintenance. A NATO or FKM rubber strap lasts 5–8 years. Leather ageing is an appreciated aesthetic feature: patina adds uniqueness and chromatic complexity. To extend lifespan, avoid prolonged exposure to extreme humidity and occasionally apply leather-specific balms.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only