Robot Watch · Graphic

Strap for Graphic Analog Silver

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter42 mm
Reference2202ST01
FamilyGraphic
MovementLa Joux-Perret caliber G100 Hours, Minutes, Seconds | Date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Graphic 2202ST01

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The Graphic 2202ST01, seen from the bench

The Robot Watch Graphic reference 2202ST01 is equipped with the La Joux-Perret G100 caliber, indicating hours, minutes, seconds and date. The model features 20mm lugs for the strap. The complete technical specifications regarding case dimensions and materials are not available for this reference.

Frequently asked questions

What is the lug width of the Robot Watch Graphic 2202ST01?

The Robot Watch Graphic 2202ST01 features a lug width of 20 millimetres. This measurement refers to the internal distance between the two attachment lugs on the case where the strap seats. Verifying this specification before purchasing an aftermarket strap is essential to ensure perfect fit and prevent lateral play during wear.

Which type of strap pairs best with the geometric design of the Graphic?

The Robot Watch Graphic 2202ST01, with its constructivist aesthetic, achieves its finest expression with structured straps featuring pronounced texture. Vegetable-tanned alligator offers maximum visual impact, with natural striations that dialogue with the formal purity of the case. Alternatively, vegetable-tanned calf leather provides a marked grain, whilst a NATO-woven polyamide strap maintains the formal austerity characteristic of the design.

How do I change the strap on my 2202ST01?

To change the strap on a 20mm lug width: 1) Place the watch caseback-down on a soft surface (cloth or mousepad); 2) Locate the small hole on each lug where the pin or spring bar seats; 3) Use a spring bar removal tool or a sewing needle to gently push from one side, lifting the pin; 4) Slowly extract the old strap; 5) Insert the new strap, aligning it with the lugs, pushing the pin until it clicks into place. Avoid excessive twisting to prevent lug damage.

Are 20mm aftermarket straps truly compatible with the 2202ST01?

Absolutely. Any strap with a 20mm lug width (corresponding to the internal distance between lugs) is mechanically compatible with the Robot Watch Graphic 2202ST01. However, construction quality varies significantly: prefer manufacturers utilising genuine stainless steel pins rather than approximate tolerances. All 20mm straps on milanostraps.it are verified for both mechanical compatibility and artisanal quality standards.

How long does a leather strap last on the 2202ST01?

A quality artisanal leather strap (alligator, vegetable-tanned calf) worn daily has an average lifespan of 3–5 years before requiring replacement or restoration. Longevity depends on: sun exposure (ages leather), humidity (accelerates wear), frequency of wear (concentrates load on specific areas). Rubber FKM or NATO straps last 5–7 years. I recommend rotating at least two straps for the same watch, extending the life of each.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only