Reservoir · Cars
Strap for Longbridge British Racing Stainless Steel / Green
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Cars RSV01.LB/130-62s_BPL02
Selected for the 20 mm lug width · workshop selection
Recycled Nylon Military Strap — Grey with Red Stitching€52
Light Blue Recycled Military Strap with Red Stitching€52
Eco Recycled Nylon Military NATO Strap — Green with Green Stitching€52
Recycled Nylon Military NATO Strap — Red and Black Edges€52
Eco-Friendly Recycled Nylon Military NATO Strap — Green with Orange Edges€52
The Cars RSV01.LB/130-62s_BPL02, seen from the bench
Frequently asked questions
What is the lug width of the Reservoir Cars RSV01.LB/130-62s_BPL02?
The lug width of the Reservoir Cars RSV01.LB/130-62s_BPL02 is 20 millimetres. This measurement is critical for compatibility with aftermarket straps and bracelets. To verify it with precision, use a digital caliper, positioning the points perpendicularly between the two lugs of the case. The acceptable tolerance ranges between 19.8 and 20.2 mm.
What is the best strap for the Reservoir Cars RSV01.LB/130-62s_BPL02?
It depends on use context and aesthetic preference. Genuine alligator amplifies the vintage aesthetic of the watch and develops a rich patina over time. Vegetable-tanned calf is the sustainable and versatile choice. NATO straps in reinforced cotton offer practicality and quick changeover. Silicone rubber guarantees chromatic stability and minimal maintenance. We recommend an initial trial with a neutral strap (brown or black) to evaluate aesthetic synergy with your wrist.
How do I correctly change the strap on the Reservoir Cars RSV01.LB/130-62s_BPL02?
The Reservoir Cars uses push-pin spring bars. To remove the strap: access the lower case compartment with a dedicated tool (spring bar tool), lightly press the pin from the outside towards the inside to disengage the internal spring, then extract the pin. Insert the new pins into the fresh strap, align them with the case lugs and push until the pin snaps into place. Verify adhesion with a gentle downward pull. Never force the pins: you risk cracking the steel lugs.
Are third-party straps compatible with the Reservoir Cars RSV01.LB/130-62s_BPL02?
Yes, provided they respect the 20mm lug width measurement and appropriate length (short and long). Verify that the strap has two eyelets aligned at 20mm distance. Straps from specialised brands such as Milano Straps guarantee precise constructive tolerances and certified materials (genuine alligator, vegetable calf, NATO in reinforced cotton). Avoid generic online products: economic savings often translate into eyelet misalignment and premature friction.
How long does a leather strap last on the Reservoir Cars RSV01.LB/130-62s_BPL02?
Durability depends on material and use. Genuine alligator, with vegetable tanning, lasts 4–7 years with regular maintenance (balm application every 6–8 months). Vegetable calf has similar autonomy, 4–5 years, but develops more visible creasing if exposed to prolonged moisture. NATO straps in reinforced cotton exceed 10 years without degradation. Silicone rubber is virtually eternal. Recommendation: replace the leather strap when the fibre begins to visibly fray at the keeper—do not wait for breakage, which could cause watch loss.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
