Oris · ProDiver

Strap for Oris ProDiver 01 733 7646 7184

Takes 26 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width26 mm
Case diameter49 mm
Reference01 733 7646 7184
FamilyProDiver
MovementOris caliber Oris 733 hours, minutes, seconds | date

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

The ProDiver 01 733 7646 7184, seen from the bench

The ProDiver features a 49mm case made of titanium and tungsten, equipped with the Oris 733 caliber. The movement offers indication of hours, minutes, seconds, and date. The 26mm lugs complete the technical configuration of this dive watch.

Frequently asked questions

What is the lug width of the Oris ProDiver 01 733 7646 7184?

The Oris ProDiver 01 733 7646 7184 features a lug width of 26mm. This specification is engineered for the 49mm case and accommodates neoprene wetsuits of varying thickness without compromising wearability. To verify compatibility with an aftermarket strap, use a digital calliper and measure the internal distance between the case lugs at the spring bar seat.

What is the best strap for the Oris ProDiver 01 733 7646 7184?

There is no single "best" strap; rather, specific choices for intended use. For professional diving: Ballistic cotton NATO or FKM rubber straps, which resist chlorine, moisture, and saltwater. For elegant wear: alligator leather in vegetable tanning or patinated shell cordovan, which create textural contrast with the titanium case. For daily versatility: black rubber strap with warm caramel calf insert. All compatible 26mm straps are available in our dedicated catalogue.

How do I change the strap on my Oris ProDiver 01 733 7646 7184?

Strap replacement requires: 1) a spring bar tool (small bifid lever), 2) a soft, flat work surface to avoid scratching the titanium case. Position the watch dial-up. Insert the spring bar tool lever into one of the two lateral holes of the spring bar and gently press toward centre; the spring will retract. Remove it fully and replace with the new strap. Repeat on the opposite side. Verify that the spring is properly seated in both holes before wearing the watch.

Can I use an aftermarket strap with 26mm lug width compatibility?

Yes, any strap bearing 26mm compatibility specifications is mountable on the ProDiver 01 733 7646 7184. Verify: 1) the actual lug width with calliper (26mm ± 0.1mm), 2) that the included spring bar is compatible with your watch, 3) that the strap keepers do not rub against case components. High-quality natural leather or vulcanised rubber straps maintain compatibility longer than budget materials, which deform under marine humidity.

How long does a natural leather strap last on the Oris ProDiver 01 733 7646 7184?

Durability depends on material and use. Alligator leather in vegetable tanning exposed to constant saltwater humidity (frequent swimming, snorkelling) has a lifespan of 18–24 months before fibre deterioration. Patinated shell cordovan, being denser and more compact, resists 24–36 months in humid environments. FKM rubber exceeds 4 years with regular freshwater rinsing. Ballistic cotton NATO lasts 2–3 years before tearing. To extend any strap's life, rinse with fresh water after chlorine or salt exposure and air-dry at ambient temperature.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only