Oris · Artix

Strap for Oris Artix 01 733 7642 4031

Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width21 mm
Case diameter42 mm
Reference01 733 7642 4031
FamilyArtix
MovementOris caliber Oris 733 Hours, Minutes, Seconds | Date

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Artix 01 733 7642 4031

Selected for the 21 mm lug width · workshop selection

All 21 mm straps →

The Artix 01 733 7642 4031, seen from the bench

The Artix is a three-hand with date watch from the Swiss manufacturer Oris. It is powered by the Oris 733 caliber with hour, minute, second and date indications. The stainless steel case measures 42mm in diameter with 21mm lugs.

Frequently asked questions

What is the lug width of the Oris Artix 01 733 7642 4031?

The lug width of the Oris Artix 01 733 7642 4031 is 21mm. This measurement represents the distance between the two lugs on the watch case and is critical for aftermarket strap compatibility. Verifying this dimension using a digital or mechanical calliper before purchasing a replacement strap is essential to ensure proper installation.

Which strap is best suited for the Oris Artix 01 733 7642 4031?

For the Artix 01 733 7642 4031, we recommend a vegetable-tanned leather strap in brown or black tones, or alternatively an alligator model for a refined upgrade. The 42mm stainless steel case pairs excellently with natural textures and developable patinas. NATO straps represent a versatile alternative for those who prioritise quick changes. Rubber is advised exclusively for highly humid environments or intensive sporting activities.

How do I change the strap on an Oris Artix?

Strap replacement requires a spring bar tool (a lever-shaped instrument with pointed ends). Position the tool on the small groove of the spring bar, apply gentle downward pressure to release the lug, remove the old strap, and insert the new one. Ensure the spring bars insert completely into the slots of the new strap, guaranteeing uniform tension on both sides of the case. We recommend working on a soft surface (carpet, cloth) to prevent accidental damage.

Can I use an aftermarket strap on my Oris Artix 01 733 7642 4031?

Yes, you can use any 21mm strap of adequate build quality. Aftermarket straps are fully compatible with the Artix, provided they meet the lug width specification and the spring bars are intact and of correct length. We recommend straps made from vegetable-tanned leather, alligator, NATO fabric, or vulcanised rubber. Avoid substandard synthetic materials, which age poorly and deteriorate rapidly.

How long does a leather strap last on an Oris Artix?

The lifespan of a leather strap depends on material, usage, and maintenance. A high-quality vegetable-tanned leather typically lasts between 3 and 5 years with regular use. Alligator, being a more compact fibre, can exceed 5 years of service. Longevity increases significantly if the strap is dried promptly after moisture exposure and protected from prolonged sunlight. The patina that develops is not a defect but a desirable aesthetic characteristic that imparts uniqueness to the strap over time.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only