Oris · Artelier

Strap for Oris Artelier 01 734 7721 4051

Takes 21 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width21 mm
Case diameter40 mm
Reference01 734 7721 4051
FamilyArtelier
MovementOris caliber Oris 734 Hours, Minutes, Seconds | Skeleton

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Artelier 01 734 7721 4051

Selected for the 21 mm lug width · workshop selection

All 21 mm straps →

The Artelier 01 734 7721 4051, seen from the bench

The Artelier features the Oris 734 caliber with skeletonized display of hours, minutes, and seconds. The case measures 40mm in stainless steel with 21mm lugs. The movement offers a direct view of the mechanism through the open dial.

Frequently asked questions

What is the lug width of the Oris Artelier 01 734 7721 4051?

The lug width of the Oris Artelier 01 734 7721 4051 is 21 millimetres. This measurement refers to the distance between the centre points of the two spring bars that attach the strap to the case lugs. To verify with precision, use a digital calliper positioned perpendicularly between the lugs. A 21mm strap ensures the geometric balance that defines this dress watch's design philosophy.

Which strap material is recommended for the Oris Artelier 01 734 7721 4051?

Mississippi alligator leather is the primary choice, particularly in cognac brown and moka brown shades. The scutate texture harmonises visually with the steel case and the skeleton caseback. Noble alternatives include European vegetable-tanned calf (minimalist aesthetic) and cordovan leather for those accepting higher maintenance demands. NATO-weave jacquard is acceptable for informal summer contexts only.

How do I change the strap on the Oris Artelier 01 734 7721 4051?

Strap replacement requires a spring bar removal tool. Position the watch on a stable surface with the caseback facing upwards. Insert the tool's fork under the spring bar on one lug, compressing the internal spring until it disengages from the lug hole. Repeat on the opposite lug. Insert the new 21mm strap by aligning its holes and pressing until both bars click into place. If uncertain, consult a professional watchmaker—the cost is minimal and prevents case scratching.

Are aftermarket straps compatible with the 01 734 7721 4051 reference?

Yes, any strap with a 21mm lug width is mechanically compatible. Milano Straps offers a dedicated 21mm collection featuring premium leathers (alligator, calf, shell cordovan), NATO-weave textiles, and natural rubber. The choice depends on occasion and desired chromatic palette. Milano Straps produces bespoke-quality straps with superior aesthetic finish compared to standard factory alternatives.

What is the typical lifespan of a leather strap on an Oris Artelier like the 01 734 7721 4051?

Longevity depends on tanning method and usage frequency. Vegetable-tanned alligator rotated among 3-4 straps typically lasts 5-7 years of daily wear. European calf resists 3-5 years. Cordovan exceeds 10 years if protected from humidity. Critical factors include wrist perspiration, direct sunlight exposure, ambient humidity, and daily use frequency. Regular conditioning with neutral creams, post-rain drying, and temperature-controlled storage significantly extend lifespan.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only