Omega · Seamaster Planet Ocean
Strap for Seamaster Planet Ocean 600M Co-Axial 42 Mécanique 6 Sapphires/ Short Strap
Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Seamaster Planet Ocean 2916.50.48 (aka: 29165048)
Selected for the 20 mm lug width · workshop selection
Black Alligator Strap with Light Blue Edges€149
Red Alligator Strap Water Resistant€195
Green Rubberized Alligator Strap with Ecru Tribal Stitching€149
Military Alligator Green Strap€138
Hammered Calfskin Strap Light Blue€98
The Seamaster Planet Ocean 2916.50.48 (aka: 29165048), seen from the bench
Frequently asked questions
What is the exact lug width of the Omega Seamaster Planet Ocean 2916.50.48?
The lug width of the Seamaster Planet Ocean 2916.50.48 is 20mm. This dimension is the standard for this generation of Seamaster and requires millimeter precision when selecting a strap. To verify, position a digital caliper between the case lugs, maintaining perpendicular contact. The straight lugs (not curved) of this model allow the use of standard straps without complex modifications.
Which strap is most suitable for the Seamaster Planet Ocean 2916.50.48 with a mother-of-pearl dial?
To enhance the grey or blue mother-of-pearl dial, we recommend a fine-grain alligator strap with vegetable tanning, dyed black or dark blue. Alternatively, cognac-colored shell cordovan or hazelnut-colored calf leather with vegetable tanning offer an aesthetic balance that does not compete with the bimetallic case. For aquatic use, a textured rubber strap maintains the marine identity of the Seamaster.
How do you change the strap on an Omega Seamaster Planet Ocean 2916.50.48?
The 2916.50.48 uses straight lugs compatible with standard strap change tools. Position the watch on a protective pad, locate the pin sections that connect the lugs to the case, and use a pin removal tool to extract the pins laterally. Never force the pins: if they resist, apply silicone oil around the pin and wait a few minutes. Reinsert the pins into the new strap with the same precision, ensuring they are fully inserted to prevent lateral movement.
Can I use an aftermarket strap on an Omega Seamaster Planet Ocean 2916.50.48?
Yes, it is possible to use aftermarket straps compatible with 20mm lugs. It is essential that the strap is manufactured with precise tolerances: the internal width of the lug slot must adhere to the pins without play, otherwise the case will oscillate. We advise against straps in low-quality synthetic materials, which deteriorate quickly. The best results are obtained with tannic leathers (alligator, shell cordovan, calf) made by artisans specializing in luxury watches. The Casati Milano atelier offers personalized consultation for sartorial pairings.
How long does a leather strap last on an Omega Seamaster Planet Ocean 2916.50.48?
The lifespan of a leather strap depends on use and tanning method. An alligator or calf leather strap with vegetable tanning, worn daily but not subjected to aquatic stress, typically lasts 18-24 months before requiring replacement. Vegetable tanning is more porous than chrome tanning and ages visibly, developing patina and increased flexibility. If frequently exposed to salt water, the lifespan is reduced to 12-18 months. A shell cordovan strap, being denser, can last up to 36 months if properly maintained. The Casati Milano warranty on custom-made straps is 18 months against manufacturing defects.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only

