Nivada Grenchen · Antarctic
Strap for Antarctic 35 Eggshell - Beige Luminova / Stainless Steel / Tropic
Takes 18 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Antarctic 35001M01
Selected for the 18 mm lug width · workshop selection
Vintage Black Calfskin Leather Strap€80
Hammered Pink Strap with Ecru Stitching€98
Natural Calfskin Rally Strap€110
Military Green Single Pass Strap — Hammered Calf€80
Matte Dark Gray Alligator Strap€195
The Antarctic 35001M01, seen from the bench
Frequently asked questions
What is the lug width of the Nivada Grenchen Antarctic 35001M01?
The lug width of the Nivada Grenchen Antarctic 35001M01 is precisely 18 millimetres. This measurement, verified between the spring bar holes, is critical for proper fitment: a strap even slightly wider (18.5mm) will not secure correctly. When ordering a strap, always confirm with the seller that it is compatible with 18mm lugs to avoid slack or mounting difficulties.
What strap is recommended for the Nivada Grenchen Antarctic 35001M01?
Choice depends on intended use and personal preference. For formal elegance: natural alligator in black or brown with pronounced grain. For versatile daily wear: vegetable-tanned calf leather that patinas gradually over time. For sports and humid environments: NATO strap in cotton-polyester or rubber Tropic strap. All must feature 18mm lug width compatibility. Atelier Casati Milano recommends a personal assessment of your usage patterns before selection.
How do I change the strap on my Antarctic 35001M01?
Remove the strap by extracting the spring bars from the lug holes using a spring bar tool, ballpoint pen without tip, or small flat screwdriver. Position the tool under the bar, gently push to free one end, then remove the bar completely. Repeat for the second bar. Insert the spring bars into the new strap, align the holes, and press carefully until they click into place. Avoid forcing to prevent damage to the lug shoulders.
Can I use an aftermarket strap on my Antarctic 35001M01?
Yes, provided it is certified as compatible with 18mm lugs and manufactured to precise tolerances. Artisanal straps of quality, such as those from milanostraps.it and specifically made for 18mm width, guarantee structural reliability. Avoid generic online straps: imprecise sizing causes play between strap and lug, compromising mechanical rigidity and watch longevity. Materials (leather, rubber, fabric) must be robust for a timepiece conceived for demanding environments.
How long does a leather strap last on a Nivada Grenchen Antarctic 35001M01?
A natural leather strap (calf, alligator, cordovan) typically lasts 2–4 years with daily wear, varying by frequency of use, climate conditions, and maintenance. Vegetable-tanned leather ages elegantly, developing patina: this is not deterioration but valued aesthetic evolution. Tropic rubber resists for 3–5 years before stiffening. To extend durability: dry the strap after perspiration, avoid prolonged immersion in fresh water, store away from direct heat. A replacement strap is always recommended for the Nivada Grenchen Antarctic.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
