Mido · Multifort
Strap for Multifort Powerwind Stainless Steel / Blue / Bracelet
Takes 19 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.
Lug width
Straps for the Multifort M040.408.11.041.00
Selected for the 19 mm lug width · workshop selection
Brown Saffiano Leather Strap€90
Apple Watch Saffiano Leather Strap Blue€105
Cognac Mohawk Leather Strap€95
Hammered Calfskin Watch Strap Green with Ecru Stitching€98
Saffiano Taupe Strap€90
The Multifort M040.408.11.041.00, seen from the bench
Frequently asked questions
What is the lug width of the Mido Multifort M040.408.11.041.00?
The lug width of the Mido Multifort M040.408.11.041.00 is 19 millimetres. This measurement falls outside standard commercial dimensions (18, 20 or 22 mm), requiring a strap constructed to the precise specifications of the case. Lug width, also termed lug distance, represents the internal distance between the two pins anchoring the spring bar mechanism to the case lugs.
Which strap is recommended for the Mido Multifort M040.408.11.041.00?
Three solutions are recommended based on intended use context. Alligator leather with vegetable tanning delivers aesthetic excellence and natural patination, pairing ideally with the 40 mm steel case. Calf leather, sober and tactilely refined, creates appreciable contrast. NATO in Cordura or ballistic nylon ensures daily practicality without visual compromise, particularly suited to sports or humid environments. Rubber represents the modern technical solution for rapid transitions between diverse contexts.
How do you change the strap on the Mido Multifort M040.408.11.041.00?
The procedure requires minimal tooling: a spring bar removal tool or tapered, non-cutting implement. Position the watch with case facing upward, insert the tool into the lateral slot of the spring bar, apply gentle inward pressure to compress the spring, withdraw the pin. Repeat on the second side. Install the new strap by reversing the procedure: align the strap holes with the pins and press gently until seated. Verify the pin is fully inserted.
Which aftermarket strap is compatible with the Mido Multifort M040.408.11.041.00?
Any strap constructed with 19 millimetre lug width is compatible with the M040.408.11.041.00. This includes bespoke straps in alligator, calf, varied leather types, NATO, technical rubber and shell cordovan, provided they are manufactured to the 19 mm specification. Industrial stock straps, typically produced in 18, 20 or 22 mm dimensions, do not fit without forcing the anchorage mechanism, risking case lug compromise.
What is the lifespan of a leather strap on the Mido Multifort M040.408.11.041.00?
A quality leather strap, crafted in calf or alligator with vegetable tanning, maintains structural integrity and flexibility for 3–5 years under moderate daily wear (not exposed to constant moisture, protected from prolonged direct sunlight). Patina develops naturally over time, improving aesthetic appeal. Factors including climate, relative humidity, wearing frequency and periodic maintenance (cleaning with damp cloth, air drying) significantly influence longevity. NATO or rubber straps exhibit superior durability, typically 5–7 years, owing to absence of natural fibres subject to degradation.
The next step
The right strap isn't chosen. It is built, together.
From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.
Request an appointment →Casati Milano · Via XX Settembre 15, Milan · by appointment only
