Mido · Multifort

Strap for Multifort Dual Time PVD / Black

Takes 22 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width22 mm
Case diameter42 mm
ReferenceM038.429.36.051.00
FamilyMultifort
MovementETA caliber C07.661 hours, minutes, seconds, Additional 24 hours Hand (adjustable) | date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Multifort M038.429.36.051.00

Selected for the 22 mm lug width · workshop selection

All 22 mm straps →

The Multifort M038.429.36.051.00, seen from the bench

The Mido Multifort M038.429.36.051.00 is a 42 mm stainless steel tool watch featuring an ETA caliber C07.661 movement. It combines hours, minutes, seconds with an independently adjustable 24-hour hand and date window, delivering military-grade legibility and functional proportions rooted in 1930s Bauhaus-inspired design. The 22 mm lug width accommodates substantial straps without aesthetic compromise.

Frequently asked questions

What is the lug width of the Mido Multifort M038.429.36.051.00?

The lug width of the Mido Multifort M038.429.36.051.00 is 22 millimetres. This measurement corresponds to the distance between the case lugs. To measure it accurately, position a digital calliper inside the slot (the recess where the strap attaches) and measure the distance between the inner walls. A 22mm lug width allows fitting substantial straps without aesthetic compromise.

Which strap suits the Mido Multifort M038.429.36.051.00 best?

The Mido Multifort M038.429.36.051.00 stands out particularly well with vegetable-tanned leather straps (Tuscan leather) in tobacco, aged brown, or black tones. These materials develop natural patina over time, acquiring character. For those seeking structured texture, rigid calf leather or alligator represent elegant alternatives. Grey-dark NATO straps offer sporting practicality whilst maintaining the tool-watch identity.

How do you change the strap on the Mido Multifort M038.429.36.051.00?

The strap is changed using a spring bar remover tool. Insert the flat fork of the remover into the lower slot of the spring bar pin, gently pushing upward to compress the internal spring. The pin will be pushed out of the slot, releasing the strap. The process requires approximately 30 seconds per side. Ensure you do not lose the small spring bar pins (they are easily replaceable but important).

Is an aftermarket strap compatible with the Mido Multifort M038.429.36.051.00?

Yes, any strap with a 22-millimetre lug width is compatible with the Mido Multifort M038.429.36.051.00. Artisanal aftermarket straps often offer superior construction quality compared to the original strap, allowing you to personalise the watch's appearance whilst maintaining full mechanical compatibility. Always verify that the lug width is exactly 22mm to avoid straps that are too tight or too loose.

How long does a leather strap last on the Mido Multifort M038.429.36.051.00?

A high-quality vegetable-tanned leather strap lasts on average 4–6 years with daily wear, provided it is exposed to moderate moisture and receives periodic maintenance. Humidity and sweat accelerate ageing; intense sun can fade the patina. Clean the strap every 2–3 months with a dry cloth; periodically apply leather conditioner (mink oil or similar). Store it away from direct heat sources. A well-maintained strap develops fascinating patina and can resist for well beyond 6 years.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only