Longines · Presence

Strap for Presence 38.5 Automatic PVD Gold / White - Roman / Strap

Takes 20 mm straps. Verified lug width, the straps that fit this model, and answers to the most common questions.

Lug width20 mm
Case diameter39 mm
ReferenceL4.921.2.11.2 (aka: L49212112)
FamilyPresence
MovementLongines caliber L888.2 hours, minutes, seconds | date
CaseStainless Steel

Spring bar

Swiss Standard universal spring bars

The right category for this model · 316L steel, all lug widths 13–26 mm

Straps for the Presence L4.921.2.11.2 (aka: L49212112)

Selected for the 20 mm lug width · workshop selection

All 20 mm straps →

The Presence L4.921.2.11.2 (aka: L49212112), seen from the bench

The Longines Presence reference L4.921.2.11.2 features the automatic Caliber L888.2 with hour, minute, second and date indication. The watch has standard 20mm lugs for the strap. The movement offers the essential functions in a three-hand configuration with a date display.

Frequently asked questions

What is the exact lug width of the Longines Presence L4.921.2.11.2?

The lug width of the Longines Presence L4.921.2.11.2 is precisely 20 millimetres, measured from spring bar tip to spring bar tip. To verify accurately, use a digital calliper positioned perpendicularly between the two metal eyes. Never exceed 20.5 mm or fall below 19.5 mm, as straps outside tolerance will create gaps or friction during wear.

Which strap material pairs best with the Longines Presence L4.921.2.11.2?

For the Presence, alligator leather represents the premium choice: regular grain and satin lustre balance the brushed steel case. Alternatively, vegetable-tanned calf offers a more understated patina and fine grain texture. Shell cordovan, vegetable-tanned, is ideal for those seeking a strap that ages beautifully over time, developing warm amber tones.

How do I change the strap on a Longines Presence L4.921.2.11.2?

The strap attaches via two spring bars to the lugs. To remove the current strap, use a spring bar tool or a slightly flattened toothpick: insert the tip into one of the lateral holes until the bar disengages, then extract the strap. Repeat on the opposite side. To install a new 20mm strap, insert one spring bar into the hole, apply gentle pressure until it clicks, then repeat identically on the other side. Verify passant symmetry after mounting.

Are aftermarket 20mm straps truly compatible with the Longines Presence L4.921.2.11.2?

Yes, any certified 20mm strap with standard spring bars is compatible. Compatibility hinges on precise lug-to-lug measurement: a 20mm MilanoStraps strap will fit identically to an original Longines unit, provided measurement is correct. Beware of straps marketed as 'universal' or 'one-size-fits-all' that tolerate up to 22 mm: the Presence requires specific 20 mm.

What is the typical lifespan of a leather strap on the Presence L4.921.2.11.2?

A strap crafted from premium leather (vegetable-tanned calf, alligator, shell cordovan) typically lasts 3–5 years with daily wear, assuming regular maintenance and occasional strap rotation. Longevity depends on solar exposure, humidity, usage frequency and care: leather treated with nourishing cream every six months ages beautifully; neglected leather becomes brittle within 18 months. Passants tend to wear before the strap body and are replaceable through a professional atelier.

The next step

The right strap isn't chosen. It is built, together.

From the atelier appointment to delivery, every step is made for those who know that things done well take time. Rare leathers, one piece at a time, eighteen months of warranty.

Request an appointment →

Casati Milano · Via XX Settembre 15, Milan · by appointment only